Hi, I am looking for a way to create log file with a script in css 11000. Is this possible? I am having a problem with my services which are using ap-kal-httplist keepalive script. But, they are showing as dying in the sys.log file.Thanks
I believe it is possible to have real servers in a different subnet to the local director virtual address by using the "alias ip address" command. This eliminates the need to use a router between the Local Director and the real servers. Does this m...
I have trouble in synchronizing the configuration from Acitve to Backup CSS. I get the error message when I use this command:CSS# Script play commit_redundancy "192.168.1.2"APP session Ip Address '192.168.1.2' doesn't match Backup Ip AddressNote:19...
I have 2 CSS11050 in a Active/Backup scenario useing Redundant-VIP and Virtual Routers. I want to have a script of something replicate the Service and owner section of the config form the ACtive Switch to the backup without effecting the VLAN or int ...
I'm a newbie to content technology. I've recently implemented a css 11154 into our test environment and done the configs. Everything seems to work fine, however when I took the webserver off line the Sorry server displayed "page cannot be found" ins...
I have 2 different server VLANs defined on a CSM blade. I need machine (i.e. my SCA SSL boxes) to be able to communicate directly with real servers located on the other vlan but for the life of me can't get the 2 vlans to talk from 1 CSM vlan to the...
Dear Networkers,I am doing MS in Computer Networks and to graduate i have to do a research thesis. I intend to develop my skills in the area of content networking as i believe that the future networks will be content sensitive. The area i have in mi...
I load balance between to IIS servers with an 11150. Each loadbalancer has a dedicated application tier server attached to it running Weblogic. Any suggestions on using healthchecks to verify that the application tier servers is fine? If it does fail...
Ok, here goes:I am using http get method for service availability. Scenario:I connect to the content rule on port 80.I then transition all the services to down by renaming my index.asp file (the file used for my http gets). I then verify that my s...
Has anyone had problems implementing a CE560 that sits behind a PIX? I am installing a CE560 that is speaking WCCP2 with a Catalyst 6509. All web traffic travels from the clients to the 6509, to the CE560, back to the 6509, through a PIX and on to ...
Hi,I would like to load balance UDP traffic on 4 IBM-Hosts which are accessed via Frame Relay and X.25 from about 160,000 Terminals. We have about 400 transactions per second. Each transaction consists of 100bytes incoming and 4 Kbytes outgoing. Whi...
Does anyone have a good way to suspend a single physical server if it hosts 100's of services? (Without manually going into each service and suspending it and then re-activating it)? Say you have 10 physical servers that all host the same content. ...
Hi,I want to request a DNS-resolution from a client over a CSS11050-service (VIP-address) to a DNS-Server-farm.I use a CSS11050 and it seems that there happens no PAT for UDP-packets.When I send a nslookup to the VIP-address the packet is translated ...
I have a CSM configured with secure router mode. I need to be able to update the content to the servers using FTP but can't access them without creating a L3 VLAN interface on the MSFC. When I create the VLAN interface, the balancing no longer work...
