Notice that the description in the ticket is a little misleading. You shouldn't simply set the flags to true, you should check their value before making a change and setting the flags exactly as they were before.
This bug is listed at Terminated, meaning it has been decided they will not fix this "bug". Is this writing on the wall that support for third party optics won't be allowed in future releases of ACI? We use primarily third party optics, and are in th...
hi all,just let me rise the question if you feel routes propagation(DHCP options 121 & 249) would be useful in case if PPTP is used as WAN interface. Cisco simply closed the bug/enhancement without a notice. also, there is no workaround to add static...
AFTER FIGHTING FLAP AFTER FLAP and calling TAC / ASW Support for WEEKS (months)I located the true root cause of this issue between AWS transit gateway and AWS flapping. AWS introduced a concept into VPN design that they label " Rekey Fuzz (percentage...
I'm running into a similiar issue, however, my line is slightly different, kron policy-list BackupCfgcli show run | redirect ftp://xxx:xxx@xxx.xxx.xxx.xxx/XXXXXX.cfg And the backup file only contains Building configuration...Current configuration : ...
I am getting fan is running at 100 percent frequently. But I didn't find any high cpu usages or even temperature is normal also didn't find any log. I don't have any TAC support. SoftwareBIOS: version 07.64NXOS: version 9.2(2)BIOS compile time: 05/17...
Dear All, we are also facing this issue on our Nexus 93180 Switches. On of four Switches is having this "Kernel-Panic-Bug". We have upgraded the NXOS to 9.3.5 but still having this issue.Does anyone else has an applicable solution to avoid these kind...
Hello everyone,I have a switch that boots up gives the following message: Front-end Microcode IMG MGR: Installed 3 image(s) in cache:Front-end Microcode IMG MGR: found microcode images for 3 devices.Image for front-end 0: flash:/front_end_ucode_cache...
CUCM v11.5.1.14900-11Jabber for Windows v12.8.2.52982 Build 302982 Users will experience static/no sound when speaking with callers but this happens every now and then, i suspect it could be the headsets that we use which are USB headsets but we wil...
Has anyone found a fix for this? We are currently experiencing this issue with an agent and restarting the device and resetting Jabber does not resolve the issue. I had to replace the device for it to work but all of the PCs that we deploy for the WF...
