Cisco Bug Discussions

Is there anyway to completely turn off proximity so the button does not appear on the touch 10?  I'm using it with the Webex Room Kit Plus.  I can shut off proximity in the settings and turn down the audio signal so that it doesn't pop up as a device...

Anyone to share a fix/workaround until fixed release?

Hello, Want to confirm, only the version 2.5(0.353) is affected?

The work around suggests that fast switching should be disabled. I'm assuming that this should be done at the port level. What is the specific command to disable fast switching for the referenced multicast drop .iissue?

hiactually i have problem with my router cisco 1941 whenever i turn it on i have to use the console in order to turn all the interfaces up does the problem related to the ios release used ? 

Hi there,users pc is getting intermittent coneection from wifi. wlc shown following error message for this client. %DOT1X-3-AAA_AUTH_SEND_FAIL: 1x_aaa.c:848 Unable to send AAA message for client x:x:x:x %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:487  Authent...

So what brave soul wants to try changing the offer to broadcast and see if it's a workaround?  Trying to figure out if you can do this on a Windows DHCP server cluster.

Dear,  I am facing the problem in the model phone cp 3905 running out of ringback after an initial announcement.This problem has already been resolved in the 8800 and 7800 family phones. Would anyone know if this correction is planned for the 3900 fa...

MACsec is not supported on the Nexus 9K 9300-FX switches with NX-OS version 7.x.  Customer must upgrade to NX-OS version 9.2 or later to allow enabling the MACsec feature.   Configuration statement 'feature macsec' is not available in NX-OS version 7...

Hello, 6.3.0 is listed in both affected and fixed versions. Could we get some clarity on the fixed/vulnerable versions please?  Thanks.

Hi, I have the same exact issue even in release 2.3. Would anyone know a solution or a workaround to reset the CLI admin password of a virtual ISE ? Would the only solution be to reinstall the node from scratch, what would be the procedure to reinsta...

Cisco Jabber Application logon error “Cannot sign in.”  Cisco Bug CSCuz03027   If you encounter error as “Cannot sign in.” while logon to Cisco Jabber it may be hit with application bug CSCuz03027   On CUCM , go to end-user profile, under tab “Servic...

It is not acceptable why Cisco removed Syslog logging option. when we upgrade from 3.1.3 to 3.1.4 or higher. we have syslog forwarding enabled to send all logs to SIEM solution which broken after the upgrade. :( . look like we have to again upgraded ...