Hi,
I am using CUCM 10.5. How I can increase the time between the repeated MOH audio.After completing the MOH its immediately repeating the same MOH. I need at least 3 seconds between the audio repetition
. Please help me.
Thank you
We ran into this issue too when we upgraded to 6.0. You just have to add source networks to each rule that matches the IP networks used within that realm. If each source network is unique, the rules will no longer overlap.
show bgp vrf ABC neighbor x.x.x.x advertise/receive route returns error % Neighbor not found
i have noticed the above err under vrf i am not able to received and advertised routes under vrf with customer end but when i created extra peering on my r...
Am I to assume that all versions below 4.5(2033) are also affected? I am running 4.5(1044) in my environment, along with some 4.3 machine, are they also affected?
This error looks to have triggered a failover condition in our environment today. no other errors were reported on the primary node. I hope Cisco fixes this bug soon. I have to keep my hardware alarm muted with this condition present.
Hi,
Cisco ASA Firepower module stop passing the traffic of internal network, as work around i disable the service policy of SFR but once i return the configuration - we experience again the issue and sfr IP address is not reachable w.
The issue was...
I am seeing this error excactly every thirty (30) minutes on my 6509-E running IOS 12.2(33)SXI10, so it is not fixed according to the bug reference. Active switch supervisor up time is 4 years, 33 weeks, secondary supervisor up time is 1 year, 38 wee...
I've experienced the same issue on multiple phones in our environment. Swapping handsets and cords did not resolve the issue. I had to replace the phone. These phones were all purchased on the same order in 2016.
