Hi,
For this bug, does it only have fix on 2.1 (0.904) and 2.2 (0.901)?
I didn't found any same version on cisco download website, only available for version 2.1(0.474) and 2.2(0.470).
I believe other than the 2 version listed in "Known Fix Release...
This error reffering to hardware error or Image error ?
this is the error captured:Mod-sfr 835> /Volume: 32925/7258112 files (0.1% non-contiguous), 1398398/29014700 blocksMod-sfr 836> pthread_create failed: Resource temporarily unavailableMod-sfr 83...
Hi, I deployed CPN 4.3.1.0.2 with DP1705, problem is similar in almost all reports.
Only CSV and XML reports showing ok.
I did same workaround but didnt fix anything.
Should I open a TAC/BEMS case?
Thank you and regards.
Hi guys!
I´m having this issue adding a VG320 with CUCM 11.5 and is still no working (only add the Module in Slot 0 / Subunit 0...).
Can any body help me!?
Thanks in advance!
We have often need to send very big dump files to the cisco TAC and unfortunately the ftp server only accepts a maximum of 2G for file.What I do is to split the big files in parts and feed to the ftp server the single parts.
Now another problem is ha...
While going to update phone parameters via BAT, getting below error :-
Update Phones - Query
Begin Time : 08/15/2016 14:20:37
Query :
SET Values :
Failure Details :
name Error Code Error Description
-------------------------------------------------...
Hi
I just would like to know, if the bug CSCvc72794, which is related to the release 16.3.3, has been solved in the release Everest-16.5.1a.
Many thanks
Bug is still alive in Version 11.5.1.12900-21
I have a customer CUCM running this version and i can reproduce this "fixed" bug. I upgraded from 10.5 exactly because of this bug ... nice to find him still alive
This is also affecting V11.8.2 Build 50390
Emoticons are populated, and work with their quick codes, but only the last 200 are so are available for manual selection
WS-C3850-24XS
"show interfaces transceiver" command entry results in >1minute CLI freeze/hang.
When the interface is specified in the command entry (example te1/0/1), the freeze/hang doesn't occur.
No errors were logged in relation to the delay.
Te...
After fighting this for months, where a reload may temporarily solve the problem but it always comes back ans destroys the stack... Found that the problem was actually the stack cables - Highly suggest swapping them before doing extensive further tro...
" ip dns source-interface loopback 0" command throws errors.file failed: Permission deniedcould not open /etc/tdns_si_entries filewriting failed% Source intf config operation failed. Error 1
Cisco marked this bug fixed, but it appears to have rear...
