Hi,Fyi, I faced the issue on an IE3300 v17.10.1 as well.. As a "workaround", I reduced the DACL in ISE to 1 statement (permit ip any 10.0.0.0 in my case), cleared the access-session on the switch, endpoint got authorized properly.Then, I went back i...
This bug can be a greater problem for three reasons:1. It requires TAC to log into your device in order to implement the workaround that will remove the interface.2. You are at risk anytime you have a hypervisor add/remove an interface for one of you...
I now have feeds that have been stuck on "Parsing" for days. IT is my understanding that the source of these feeds is defunct and should be removed. The problem is, I can't delete them. I can't even queue them to be deleted the next time the syste...
We have a similar problem to this one.In our language we use words with an orthographic accent, for example, the word family in my language is written like this: Família, with an orthographic accent on the letter i.Many people put in the SSID of thei...
We have had the above issue and whilst I am not a Cisco SDWAN expert and not trying to resolve this at a vSmart / vManage / CEDGE level, I wanted to see if a potential workaround could be explored by exploring the options below... We have dual CEDGE ...
We had 4 of N9K-C93180YC-FX3 and 2 N9K-C9316D-GX are running this "shutdown" issue, but not operational (Warning: if unplug the power cable on good one, the whole switch will be rebooted) First one get fixed by doing a RMA with new replacing new powe...
Is there any chance that cisco releases a new cimc version until end of 2020? I am trying to guess will I still can access my server CIMC after the end of support with old versions of browsers?
#show platform hard fed switch active fwd-asic resource tcam utilization
CAM Utilization for ASIC# 0
Table Max Values Used Values
------------------------------------------------------------------...
Hi everybody, I was a case with current version: Cisco IOS Software [Denali], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.3.8, RELEASE SOFTWARE (fc3).Can someone give me a version to fix this bug, because in this workaround don't recom...
It certainly will be useful to have this information tracked via syslog directly from the client or via the server own logs or syslogged. - when a user manually opens/ closes Jabber - Uses the "Disable phone service" This will be useful when identify...
