This example shows ICPAM integration to VSM 7.12
Principal of operation:
SENSOR_CONNECTOR will connect to ICPAM & register the callback endpoint. Currently SENSOR_CONNECTOR is registering endpoint for all types of events available in ICPAM.
You have confirmed that EFM is running, and you can open a broker connection using port 8080 or 8443 from the EFM server. However, from an external broker, not hosted on the same machine, the connection is refused.
Is this is your fi...
EFM broker connection to upstream EFM server is failing. You have confirmed that the IP connectivity to the destination port number (tcp/8448 by default) is open, yet the connection does not establish from the EFM broker to the EFM server.
EFM v1.6.1 IOx application now supports passing parameters via GMM.
This capability now enables configuring an upstream broker for that EFM node via GMM UI.
Step 1: Install EFM 1.6.1 IOx app within GMM
Step 2: Deploy this app on a gateway (The upst...
There are a couple of ways to connect EFM with DCM:
Using MQTT DSLink
The MQTT method is outlined here.
Install and start MQTT DSLink on EFM node
From dataflow editor page: Configure the MQTT link to c...