Good morning, I'm trying to write a Python (ntersight Python SDK) script to create a table like this:| UcsServerProfileName | Server attached | Server Power Status | Type (M6 – M7) | Server Serial Number | WWPN Fabric A | WWPN Fabric B |I can't find ...
Forum Posts
Here are the results of surveys regarding "Which AI Agents would you most want to find on Cisco DevNet Code Exchange?": Combined Survey Results (100 total votes): Configuration automation: 37% - The top choice among the DevNet community, indicating...
I wanted to share a version of a script I recently used to analyze configuration for routers across my network. I found a route map attached to a BGP neighbor that was not defined and caused the advertisements of prefixes to be blocked, I was curious...
Hello, I am a student learning IoT and Digital Transformation. I want to be able to automate simple switch configurations. I would like to be able to have a standard configuration on all switches that I can modify as needed. What type of program or c...
Where can I find more information about scripting the following:1. SSH to ISE 2. run 'application configure ise'3. Select <16>4. Select <0> Thanks,John
Resolved! Update existing project in cisco devnet
I wanted to update https://developer.cisco.com/codeexchange/github/repo/Appdynamics/nginx-monitoring-extension/ to the latest information available in the corresponding Github https://github.com/Appdynamics/nginx-monitoring-extension. I want both gi...
Good day everyone. My name is Johannes Robbetze and I am new to the automation side of things. I try to write a Python script that will log in to multiple Cisco switches and change the local username and password as well as the enable secret password...
hi engineers i have an issue with cat 9300 i have 9300 as core and downlink connected 3 cat 1300 all are with trunking ports , i have 5 vlans on core as following 192.168.1.0, 2.0, 3.0, 4.0, 5.0each vlan have users but they are not able to ping each ...
Resolved! python ssh catalyst 1300 netmiko fail
Hi !Try to connect with Python (3.13) and netmiko (4.5.0) to Catalyst 1300 ( sw 4.1.6.53).The problem is that first there is one prompt : "login as:" and secondly a prompt : "User Name:"ssh = ConnectHandler(device_type='cisco_s200', ip=x.x.x.x, usern...
Resolved! vManage API
Has anyone had success in calling generate bootstrap API /system/device/bootstrap/download/{id} ?
Hi,I would like to control a Cisco Business 220 Switch for automation purposes using the .NET framework to achieve this (C# code).Are there any sample codes using RESTful API or any other method to control the Cisco Business 220 Switch and get a resp...
I am using the cisco.ise.system_certificate_exportmodule in ansible to export the certificates , but I am getting the following error : An exception occurred during task execution. To see the full traceback, use -vvv. The error was: UnicodeDecodeErr...
Hello,When running the attached script, I am running in the following issues:response = requests.get(ip + dn, headers=headers, auth=auth, verify=false)NameError: name 'headers' is not definedDuring handling of the above exception, another exception o...
Hi All I have following test created to run multiple commands against a a device within testbed. I would like to log the output to a variable (including the switch/router prompt) and print out as result. I know this functionality is already in the "p...
Hi All, Some of you may have received emails indicating one or more of your Code Exchange repos have been deprecated. One of my repos was affected as well. You will also notice a blue banner under the header in your Code Exchange dashboard for your...
