10-25-2018 02:10 PM - edited 03-17-2019 07:45 PM
Hello everyone,
I have the following scenario
Main office - Site A: 1 cucm publisher,1 subcriber and two im & presence servers. Active directory-DC1.Everything is working very well
Site B is a new site. So ,i have the following set up in a lab environment first. 1 publisher ,1 im and presence server and 1 Active directory - DC2.
Dc2 is the secondary domain controller to DC1. AD replication is working well.Dns resolution is also working as well as srv records
Challenges:
The jabber client user is not able log on due to the following error 'cannot communicate with the server '
Since am having two publishers,with different srv records ,the client is finding it difficult to locate the srv record for its own local publisher since all are using the same domain ,example.local.
For instance. user1@example.publisher?ies _cisco-uds._tcp.example.local and the dns returns
publisher1.example. local and publisher2.example.local
Both publisher 1 and publisher 2 make use of the same ldap direcory.What do i set up to allow user1@example.local contact its publisher
Solved! Go to Solution.
10-25-2018 04:16 PM
It sounds like you need to set up Intercluster Lookup Service (ILS). Then Home Cluster checkbox on end user page will control which cluster Jabber will register to.
10-26-2018 05:32 AM
Hello Ev,
I have enabled ILS but i was not able to log in before. I did work around by re-entering the dns srv records.Also i discovered that i enabled uri in the Enterprise Parameter without enabling uri directory for the users
All these contributed to the success.thanks a lot.
10-25-2018 04:16 PM
It sounds like you need to set up Intercluster Lookup Service (ILS). Then Home Cluster checkbox on end user page will control which cluster Jabber will register to.
10-25-2018 10:37 PM
10-26-2018 05:32 AM
Hello Ev,
I have enabled ILS but i was not able to log in before. I did work around by re-entering the dns srv records.Also i discovered that i enabled uri in the Enterprise Parameter without enabling uri directory for the users
All these contributed to the success.thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide