08-01-2019 10:51 PM
Hello!
I configured a new voicemail profile with new DN as in this manual https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_J38B2ACB_00_jabber-iphone-server-setup-9-5/JABI_BK_J38B2ACB_00_jabber-iphone-server-setup-9-5_chapter_01000.pdf
All works fine when I call directly to voicemail pilot. But when I push the call voicemail button in Cisco Jabber, it calls to previous default voicemail DN.
In CUCM default voicemail profile pilot is set to new DN.
There is no previous DN in all Advanced Features - Voicemail and Call Routing - Route/Hunt submenus.
Where else the previous default voicemail DN may be set?
08-02-2019 06:13 AM
Hi,
What is the version of CUCM, Unity or Unity Connection, CUPS and Jabber?
08-04-2019 09:48 PM
8.6
08-02-2019 08:30 AM
Since you followed the documentation, can I assume that you changed the voicemail pilot as well as the voicemail profile? If not, double-check that *both* are configured correctly and both are both are set to be the default.
What happens if you assign the new voicemail profile manually on the DN of the Jabber client? Does the call go to the old number or the new number?
And - in the mind set of "when in doot reboot" - try fully exiting the Jabber client, resetting the CSF device in CUCM, and then logging back in.
Let us know how it goes.
Maren
08-04-2019 08:44 AM
08-04-2019 08:51 AM - edited 08-04-2019 09:17 AM
I have had resetting devices while unregistered (not just trunks and gateways) fix a surprising number of weird issues over the years. Especially those issues that "shouldn't" be happening because everything is correctly configured. I don't know the reason behind it as I am not a database guru - and I know it shouldn't make a difference - but it's an easy thing to try.
Maren
08-04-2019 04:50 PM
08-05-2019 05:19 AM
I don't have a source, only my experience (which means I could be totally talking out of my backside). It has happened often enough that I include it in my troubleshooting steps. (And it's easy, so why not?) Maybe it ends any lingering internal processing threads in CUCM. Maybe it clears the client's processing? Maybe it simply gives the systems time to reset themselves. I get that you want a 'real' answer, and I'm with you in learning about the subtle things that impact bigger things. I don't have one for you.
Maren
08-04-2019 09:57 PM
Yes, the voicemail pilot and the voicemail profile is changed to the new DN.
Resetting Jabber not helps.
08-05-2019 05:14 AM
So then:
1) What happens when the DN on the Jabber CSF device is set manually to the new Voicemail Profile (rather than leaving it at None/Default)?
2) Please provide a trace file including that Jabber client pressing the Voicemail button along with the PRT file from the Jabber client including that same thing.
Maren
08-06-2019 12:30 AM
Thanks for your care. I reset Voice Mail Profile on DN setting to <None> and set it back to default VM profile. After this trick Voicemail button works fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide