06-13-2013 10:12 PM - edited 03-17-2019 03:18 PM
Hi
I would need to configure Jabber in desk phone mode to control the 2nd line of the user device (UDP profile) and not the primary one. Even not associating the line appearance of the 1st line to the user, it's always the primary line that pop up when calling with jabber. Could please someone tell me if it's possible or not ?
Thanks for your anwers
Christophe
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
06-16-2013 09:04 PM
What ever line you want to control on your phone, will have to be on top of the button items on the phone configuration page, unfortunately
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
06-16-2013 09:04 PM
What ever line you want to control on your phone, will have to be on top of the button items on the phone configuration page, unfortunately
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
06-18-2013 12:20 PM
Thank you for your feedback, that's too bad.
As a workaround in my project I had to use 1st line appearance for jabber control and develop an ip phone XML service with AXL to control the CFA of the 2nd one.
Regards
Christophe
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide