06-04-2014 02:33 PM - edited 03-17-2019 04:13 PM
I have a lab configuration in which I have CUCM 9.1 and Jabber 9.7.1. I have a user who is LDAP synchronized and has been assigned a CSF Device and a Physical Phone device. I can log into th jabber client and it connects fine with the physical phone but when I try and shift the connection to use the computer as the phone I get an error (red X on the computer ICON) . In the connection status window it says that I cannot connect to the softphone
06-04-2014 03:11 PM
I would actually start by looking into the connectivity from the Jabber client to the CUCM
Make sure you have the CCMCIP & TFTP settings configures on the CUPS
Check for LDAP Authentication on the CUCM, check if User is assigned to the DN and the phone is associated to the user
06-04-2014 03:12 PM
You can try this as well https://supportforums.cisco.com/document/147561/configuration-steps-jabber-softphone-mode
06-04-2014 06:59 PM
I am on 9.1 and in my CUPS server I do not see a menu that says application > Jabber. I only have application > Settings. Is something wrong with the environment
06-05-2014 01:06 PM
The above is from my Cisco IM & P 9.1 as well
You dont see this option?
06-06-2014 12:16 PM
Is your CUCM server name configured as host name?
If you have only one server in the CUCM cluster, can you just try changing the server name in System --> Server from hostname to IP address, and then re-login to Jabber client. If you have multiple servers in cluster, it may cause DB issues, and you need to follow procedure. As this is your lab server, please try it.
06-09-2014 07:58 AM
Does the user have the Standard CTI Enabled role?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide