setup multiple sip trunk on cube

[Abdulkader Naji]

is it possible to use my existing ISR 4321 voice gateway to add two more sip trunk settings .and how?

[Roger Kallberg]

Yes it’s possible. Search for this on the forum, it’s been asked a few times before and read the configuration guides, it’s covered in it.

[Roger Kallberg]

For example look at this post. https://community.cisco.com/t5/ip-telephony-and-phones/multiple-sip-trunks-to-one-cube-and-cucm-for-different-sip/m-p/4021471