cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
10492
Views
31
Helpful
8
Replies

UCM 12.5 - Error on upload of wav file for ( Announcement )

ntheolog
Cisco Employee
Cisco Employee

Hello, just upgraded to UCM 12.5 from 11.6 ( the wav file that worked fine on my 11.6 ) doesn't work ( allow me to upload )

Getting the error ( The .wav file could not be translated by the Audio Translator Application.)

A few versions back there was a bug with permissions on the folder... ?!  Format of the wave file  (• 16-bit PCM )  standard.. but as mentioned same file thats used in my UCM 11.6

Any suggestions?

1 Accepted Solution

Accepted Solutions

Ratheesh Kumar
VIP Alumni
VIP Alumni
Hi there

Seems to be you are hitting the same bug. But the 12.X can’t be find either in affected or fixed. Better to open up TAC and get it fixed.

Unable to upload custom announcement wav file
CSCuo54948
Description
Symptom:
Unable to upload custom announcement or MoH files
You will receive following error:
"The .wav file could not be translated by the Audio Translator Application"

Conditions:
Upgrading from 9.x with one or more custom announcements installed before upgrade.
After upgrade will not be able to upload new custom announcement wav files.
The problem could occur with Fresh Installs as well.

Workaround:
Directory permissions must be set to 754 by TAC using remote console access to each server in cluster.

Further Problem Description:
Upgrading without having any custom announcements prior to the upgrade will allow uploading custom announcements after the upgrade since no previous files and directories are migrated from previous CUCM version.



Hope this helps
Cheers
Rath!

***Please rate helpful posts***

View solution in original post

8 Replies 8

Ratheesh Kumar
VIP Alumni
VIP Alumni
Hi there

Seems to be you are hitting the same bug. But the 12.X can’t be find either in affected or fixed. Better to open up TAC and get it fixed.

Unable to upload custom announcement wav file
CSCuo54948
Description
Symptom:
Unable to upload custom announcement or MoH files
You will receive following error:
"The .wav file could not be translated by the Audio Translator Application"

Conditions:
Upgrading from 9.x with one or more custom announcements installed before upgrade.
After upgrade will not be able to upload new custom announcement wav files.
The problem could occur with Fresh Installs as well.

Workaround:
Directory permissions must be set to 754 by TAC using remote console access to each server in cluster.

Further Problem Description:
Upgrading without having any custom announcements prior to the upgrade will allow uploading custom announcements after the upgrade since no previous files and directories are migrated from previous CUCM version.



Hope this helps
Cheers
Rath!

***Please rate helpful posts***

thank you. I look into opening case with TAC

Thanks Ratheesh you saved me a bit of looking for the issue!

 

Cheers

 

Trent W

mbeain
Level 1
Level 1

Any way to solve this problem in a demo image (for training) (not licenced)??

 

Thanks.

 

 

demo servers have demo licenses and are entitled to tac support; you might be referring to the grace period.

Kiran Kumbhar
Level 1
Level 1

Hi All,

 

I managed to get it resolved with help of Cisco TAC on UCM12.5

 

 

Changing mode to Permissive solved my issue

 

+++++++++++++++++++++++++++++++++++++++++++++

 

admin:
admin:utils os secure status
OS Security status: enabled
Current mode: enforcing
admin:
admin:
admin:
admin:utils os secure permissive
OS security mode changed to Permissive
admin:
admin:
admin:
admin:utils os secure status
OS Security status: enabled
Current mode: permissive
admin:

 

++++++++++++++++++++++++++++++++++

Thank you kiran 

Are  you slove problem uploading wav format by  Changing mode to Permissive ??

Thank you!!!