Collaboration Knowledge Base

This document was generated from CDN thread Created by: Vidar Nordbrenden on 24-08-2009 08:38:19 AM HelloI have used the above mentioned macro in a boardroom installation using a C60, and I have found some problems with the Tandberg addressbook.This ...

This document was generated from CDN thread Created by: Stephen Bretherton on 20-08-2009 09:45:15 PM What are the chances of getting the DXF drawings of the rear IO of both C60 & C90 with the connections labelled?Would be helpful in Visio

This document was generated from CDN thread Created by: Stephen Bretherton on 19-08-2009 04:58:28 PM I am with TANDBERG's Solutions team based in Northern Virginia outside Washington DC.We create products for vertical markets using TANDBERG's core te...

This document was generated from CDN thread Created by: Frode M on 19-08-2009 03:07:07 PM By accident I happened to notice that the OSD/Menu interface is available as an undocumented local input connector #6 (although in a scary green color). This ac...

This document was generated from CDN thread Created by: Frode M on 19-08-2009 02:50:43 PM Is there a way to configure the audio volume for incoming remote audio streams via the XACLI interface on a C90 running TC2? Similar to the "xConfiguration Audi...

This document was generated from CDN thread Created by: Peter Moodie on 12-08-2009 10:22:38 AM Hi everyone.My name is Peter Moodie and I'm yet another TANDBERG person! I'm the manager of the Subject Matter Expert Team in EMEA (aka TPM). I'm also resp...

This document was generated from CDN thread Created by: Davis Whitehurst on 10-08-2009 09:08:05 PM I am upgrading some existing MXP systems to C60 codecs. These systems took advantage of the external source switching capabilities in the MXP codecs. I...

This document was generated from CDN thread Created by: David Bruun-Lie on 07-08-2009 03:58:37 PM The new software version TC 2.0 for Codec C20, C60 and C90 is now released.The AMX module that has been available for a while for downloading from this ...

This document was generated from CDN thread Created by: Pooven Naidoo on 04-08-2009 04:40:07 PM Is it Possibly to: If I am in a multisite call to four other sites, can I mute audio going to a specific site or sites.Subject: RE: Multisite on MXP or C6...

This document was generated from CDN thread Created by: David Bruun-Lie on 31-07-2009 10:30:11 AM Hi Pooven,the Codec C20 is not intendes as an integration product and can therefore control only one camera throught it. Of course by feeding two camera...

This document was generated from CDN thread Created by: Jeremy Vierck on 30-07-2009 08:48:37 PM What is the status of Multiway as it pertains to the C series endpoints? Being able to move seamlessly to an MCU was an important selling point for some c...

This document was generated from CDN thread Created by: Marko Laurits on 30-07-2009 03:41:24 PM Hello world!Can you recommend a simple device had two serial ports and could "translate" messages from one device to another?For instance, I would connect...

This document was generated from CDN thread Created by: Enrico Conedera on 27-07-2009 06:31:57 PM My name is Enrico and I am Endpoints Product Manager for Tandberg Americas.  I am putting in a C90 lab with a BlueRay player (PS3), 5 cameras, 5 monitor...

This document was generated from CDN thread Created by: Andrew Ferguson on 25-07-2009 09:02:54 PM Hi there,We have 'Access Code' activated on a lot of our 6000MXP units so that when you are dialling a call, you must enter a correct access/billing cod...

This document was generated from CDN thread Created by: Alexander Kuschewski on 23-07-2009 02:21:27 PM HI @ All,I hope you understand the problem. We have a customer he like to make audio recording of his conference. At the 6000 MXP I have audio and ...