06-14-2018 02:11 PM - edited 03-14-2019 06:15 PM
I need the ability to change the cli on particular outbound calls -has anyone done this and how
I saw the variable call.user.microapp.override_cli which initially looked like it provides what I'm looking for -has anyone used the variable, what's it used for
Thanks
06-28-2018 02:54 PM
Any update on this
06-28-2018 04:27 PM
To make sure I understand your request right..
You want to do this via an ICM script or CVP vs doing it at the phone or CUCM level?
06-28-2018 10:42 PM
06-29-2018 10:05 PM
Hi,
For Manual outbound we can change in CUCM & VG dial-peer level but Dialer we can change only from VG dial-peer level.
Below are the example for Manual and outbound dialer dial-peer , Based on the country you can change CLI.
Or else we can use campaign prefix number masking for each campaign
VIOP Dial-peer for Manual and Dialer
-----------------------------
dial-peer voice 434 voip
description dialer call for UAE
translation-profile incoming DIALERINT
destination-pattern 900971T
session protocol sipv2
session target ipv4:10.x.x.x
voice-class sip rel1xx require "100rel"
voice-class sip profiles 2
voice-class sip options-keepalive up-interval 300 down-interval 300
dtmf-relay rtp-nte
dtmf-interworking rtp-nte
codec g711alaw
clid network-number +9xxxxxxxx
no vad
!
dial-peer voice 336 voip
description Isreal Outgoing call to ISP-Telecom
destination-pattern 00972T
session protocol sipv2
session target ipv4:10.x.x.x.x
incoming called-number 00972T
voice-class sip rel1xx require "100rel"
voice-class sip profiles 1
voice-class sip options-keepalive up-interval 300 down-interval 300
dtmf-relay rtp-nte
dtmf-interworking rtp-nte
codec g711alaw
clid network-number +9xxxxxxxx
no vad
-------------------------------
below is the Pots dial-peer example
dial-peer voice 210 pots
tone ringback alert-no-PI
description <<POTS_DIAL_PEER_FOR_INTERNATIONAL_CALL>>
translation-profile outgoing CHANGE_TO_EXTERNAL
destination-pattern 9T
progress_ind alert enable 8
progress_ind connect enable 8
clid network-number +974xxxxxxx
port 0/0/0:15
Thanks,
Ram.S
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide