Hi ,i am facing the issue wit CAD ,if we open first time it doesn't respond . After restarting the application it works and call routs properly.
Any help will be appreciated..
Br,
SHIB
Hi Shaikh,
Please check the below points.
1. Did you logout the CAD properly in the last time, if yes, also please check if the Agent.exe is not running from your windows task manager.
2. Make sure that antivirus\fiewalls on the CAD box are not blocking any ports.
3. If its only happening on one box, try uninstalling and reainstalling the CDA software once.
4. Id the problem still persists, try rebooting your UCCX boxes and recheck.
5. After all these iterations if the issues exists, attach the CAD logs (threshold level) and will see what is really happening here.
Hope it helps.
Anand
Please rate the helpful posts by clicking on the stars below the right answers !!
Dear Anand , it is happening with all PCs ,can you help me how to obtain CAD logs...Thankyou
Hi Shaikh,
CAD logs are located in the below path,
C:\Program Files \Cisco\Desktop\log
To enable tracing on the CAD\CSD,
Hope it helps.
Anand
Pls rate helpful posts !!
Dear Anand,
Help me to fond out from where i can set size a,files and treshold..Thankyou
Hi Shaikh,
On your CAD\CSD client boxes, navigate to ,
C:\Program Files\Cisco\Desktop\config\agent.cfg (supervisor.cfg in the case of Supervisor) and make sure the config parameters set as below:
- Size=30000000
- Files=40
- Threshold= TRACE
And please note down the time stamp of the client box when the above issue is happening and collet the logs during this time stamp and post it back.
Hope it helps.
Anand
Hi Shaikh,
Have you find the root cause for this? We are facing similar issue. We are using UCCX 10.6
Anyone who can help on this?
Thanks
KBSL