12-24-2012 01:09 AM - edited 03-14-2019 11:01 AM
Hi;
I found a customer that he has two machines and using them both as CVP Call Server and VXML Server (at the same time). I know this is not the best practice, but for the meanwhile he does not need to buy hardware. The traffic still is little (up to 1 one E1).
Could it be stable for this period?
Otherwise, if we made one machine to be CVP Call Server and one machine to be CVP VXML Server, then there will be a single point of failure ..
What do u suggest?
Regards
Bilal
12-24-2012 02:17 AM
Bilal,
Co-locating CVP Call & VXML server is fine & a supported practice. Please refer CVP SRND Guides ( depending upon your CVP version ) available here
GP.
Pls rate the post if it helps !!
12-25-2012 01:01 PM
To further elaborate yes co-residing the CVP Call Server and VXML server on the same hardware is supported. In a comprehensive deployment you would need the Call Server to route the call to the VXML server anyway thus if the Call Server went off line then the VXML server would also be crippled.
Ideally you would have two combo boxes/VM's and load balance between the two or have one as a hot stand by depending on what your licensed for.
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide