04-08-2008 12:37 AM - edited 03-14-2019 02:03 AM
We have a problem with a customer using Internet Script Editor. He needs to use it non encrypted, so when he modifies the connection info to port 80 and removes the tick from "encrypted communication" it work but then the next time he connects the connection settings are automagically set to encrypted again.
I've confirmed this behaviour on my own machine, is this a setting somewhere on the server or can we fix it on the client side?
Solved! Go to Solution.
04-08-2008 01:59 AM
Hi there,
the default connections and scenarios are documented here in chapter 10:
I am afraid but the default option to connect could not be configured at will AFAIK, this would require a Product Enhancement Request, as a possible workaround if you don't use SSL at all on that server you should be able to remove the SSL Certificate for the ISE website and the server will default to HTTP connections then.
Regards,
Riccardo
04-08-2008 01:59 AM
Hi there,
the default connections and scenarios are documented here in chapter 10:
I am afraid but the default option to connect could not be configured at will AFAIK, this would require a Product Enhancement Request, as a possible workaround if you don't use SSL at all on that server you should be able to remove the SSL Certificate for the ISE website and the server will default to HTTP connections then.
Regards,
Riccardo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide