12-02-2015 01:13 PM - edited 03-14-2019 03:30 PM
Hi
I have two ICM and two CVPs. I want to inter connect them in HA envoirment. If I make more than one VRG PG for different , system got error and restart after 2 min.
Please tell how I can do it. Wether I can make two PIMs for differnt CVP .
Solved! Go to Solution.
12-03-2015 03:47 PM
Are you saying that only one VRU is Active on the PG or that both VRUs are active on one PG and idle on the other? If the second then that is expected. If the first then you need to review the configuration of the CVP and the PGs.
12-03-2015 05:54 AM
When you say you have 2 ICMs I am assuming you mean you have sideA and sideB with redunduncy on each component (Logger, Router or Rogger, PGs, HDS, etc).
CVP integrates with ICM via PGs, and if you have 2 CVPs they can be connected to the same physical PG server defined as seperate VRU PIMs.
The CVP SRND describes the architcture well, so I suggest you review it.
12-03-2015 08:06 AM
Thanks for reply. I have configured two VRU PIMs conntecting two CVPs but issue is when one VRU PIM connects other got on ideal state.
ICMA has two VRU PIMs
PG1A for CVP .204
PG2A for CVP .205
But It connects only one at same time.
12-03-2015 03:47 PM
Are you saying that only one VRU is Active on the PG or that both VRUs are active on one PG and idle on the other? If the second then that is expected. If the first then you need to review the configuration of the CVP and the PGs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide