04-26-2013 01:28 AM - edited 03-14-2019 11:37 AM
Hi ,
We have 4 CUCM (7.x) cluster for four regions. Each cluster has 1 Pub. And 3 Subs. I want to enable inter cluster calling because all regions are at our MPLS Network.
Kindly suggest what to do to enable calling across 4 regions.
Regards,
Soni
04-26-2013 01:59 AM
Hi,
this is the "Contact Center" forum, your post would get better exposure in the "IP Telephony" section, but anyway. The easiest thing would be to set up intercluster trunks between clusters, and perhaps use Locations-based CAC to control the number of calls.
Or, a bit sophisticated approach: use a Gatekeeper (or a cluster of gatekeepers) to decide where to route the calls. You may also use Locations-based CAC or Gatekeeper CAC (or their combination).
G.
04-26-2013 02:15 AM
Thanks Gergely for reply. I will post the same to IP Telephony section.
Well I am planing to create SIP trunk between the cluster and add route. will it solve this.
04-26-2013 02:17 AM
Hi,
yes, SIP is also an option.
G.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide