03-21-2011 01:28 PM - edited 03-14-2019 07:37 AM
Hi ,
When I tried to log in the Agent service on the IP phone, I got an error "selected service IP Phone Agent isn't active. Select another service IP Phone Agent". It had been working well untill they were restarted because of adjusting time zone.
Agent desktop application on a desktop is fine. Has anyone experienced of this kind of error?
We use UCCX 8.02 and CM7.15
Thanks in advance,
Jeff
03-22-2011 10:55 AM
If your phone attempts to login to an inactive service, this error message appears. Is you system configured with more than one CAD services !? If yes you should be able to log in to an other service. I think you can get more deatils on this error in IP phone user guide.
Check the CAD services again if you have this problem with all the phones. Look for any changes you have done by mistake while doing the time zone change in CM.
03-22-2011 11:23 AM
Hi Sunil,
Thank you for your help.
As I mentioned earlier, everything was fine before restarted two UCCXs after changed the Time Zone in the UCCXs, not in CM.
Whenever I logged in a primary UCCX, there is a warning message poped up:
" WARNING: The Unified CCX system is currently using a license that has a grace period of 30 days. You have 23 days remaining. When the grace period ends, the Unified CCX system will no longer function. Refer to the Administration Guide of the system on obtaining a valid license."
I had new license files after the warning message showed up and will upgrade them soon. This happened is realated with the license issue?
Jeff,
03-22-2011 11:39 AM
Jeff,
I believed it’s purely a license issue and adding a valid license file would fix this.
-Suni
03-23-2011 05:01 AM
Suni,
I upgraded the new licenses but there was not anything changed.
I restarted CTI manager on CM as well.
It still says "Selected IP phone Agent service is not active" on the phone.
03-23-2011 05:17 AM
So you have two servers? And only one IP Phone service for IPPA?
What do you suspect would happen if the server your IPPA is pointing to went from master to slave?
You need two IPPA phone service URLS: one for each server.
Verify in CUCM what IP address the URL is using, aNd then in UCCX verify which server is engine master. It should be the same in order for this to work.
Sent from Cisco Technical Support iPhone App
03-23-2011 06:03 AM
Hi Anthony,
I checked them.
Here is the infomantion;
On CMs( Pub: XX.101, Sub: XX.102),
Publisher :http://192.168.XX.105:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp
Subscriber:http://192.168.XX.105:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp
On UCCXs(Pri :XX.105,Sec:XX.106),
192.168.XX.101
192.168.XX.102
Regards,
Jeff
03-23-2011 09:41 AM
Right, so you see how your URL's are pointed at 105? You should have two services, one for 105, and one for 106.
You can label them:
IP Phone Agent - Primary
IP Phone Agent - Secondary
And put both on your phones. Educate your users to always try the primary first, and the secondary if the error message comes up.
03-23-2011 09:48 AM
Thanks for your help.
Does it work if I change the IPPA server IP address from 105 to 106 on a CM when I meet this kind of fail over?
Regards,
Jeff
03-23-2011 11:15 AM
Yes, it would, you would just click the Update Subscriptions button after you click save.
03-24-2011 04:53 AM
Hi Anthony,
I tested it by changing IP address of UCCX in CM last night but it did not work.
It has still the same error message.
Thanks,
03-24-2011 06:15 AM
What's the state of your cluster, IN_SERVICE?
Which server is master on the browser and IPPA service? Is it also IN_SERVICE?
Sent from Cisco Technical Support iPhone App
03-25-2011 11:44 AM
Everythink looks fine.
I will restart the UCCXs.
Thanks,
Jeff
03-27-2011 12:09 PM
Hi Anthony,
I still have the same error message even though I restared two UCCXs.
03-28-2011 11:28 AM
I am experiencing the same issue on my system.
I am running CM 8.0.3 and CCX 8.0.2. In order to get logged in I had to restart the sub CM then the pub CM then restart the IPPA (Cisco Desktop Browser and IP Phone Agent Service) on CCX to get the service working again. I do not have a cluster on the CCX only on CM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide