Hi Experts, I have two quick questions regarding APIC-EM discovery.Do we have the list of SSH queries which are being polled during discovery or when running a Path Trace? I’m asking as I snooped the traffic during discovery (file attached) and did f...
Labels
-
ACI
(131) -
ACI-toolkit
(45) -
APIC
(576) -
Cisco Software
(1) -
Cloud Controller
(3) -
Data Center Network Manager (DCNM)
(4) -
General
(3) -
Online Tools and Resources
(1) -
Open Source and Open Standards
(2) -
OpenDaylight
(1) -
Other ACI
(6) -
Other Analytics and Automation Topics
(2) -
Other Automation Analytics Topics
(5) -
Prime Infrastructure
(3) -
WAN Automation Engine
(2)
Forum Posts
Working on a large deployment using APIC-EM PnP.Have ISR4331s with 1MFT-T1/E1 & 2MFT-T1/E1 NIMs installed.APIC-EM does not the normal deployment of the new image to each router, and then applies the configuration, however when I check the configurati...
Resolved! APIC-EM PnP Application upgrade issue
I needed to reset my APIC-EM 1.5.0.1368 instance due a misconfiguration. After running the "reset_grapevine" command from the CLI, the system restarts with PnP version 1.4.3.1009. I'm trying to upgrade this to version 1.5.0.211, but it doesn't appe...
Hi,I can successfully login to APIC node via HTTPS. I am now trying to open a Websocket connection to this node from JavaScript via web socket supported Chrome browser.I have tried to open a Websocket session via "ws:" and "wss:" resulting into diff...
Resolved! Pnp startup vlan problem
Hi All,I have some problems regarding getting dhcp config for switch.I have topology: DHCP server (192.168.1.50) <-- GRE over IPsec--> Router <--------> Switch.Router config:interface GigabitEthernet0/0/1.99description Mgmtencapsulation dot1Q 99 vr...
Resolved! Debbuging PnP process
Hi All,I can't find any information about how to debug failed PnP proccess, where is log files stored and so on .I'm trying to deploy config on ISR router and getting:Received response from pnp agent for message correlatorId: CiscoPnP-1.0-16-320-7FA0...
Resolved! Need suggestion for PNP solution
Hi,I need some suggestions for PnP solution. I have many branch offices.Branch office it is simple topology Router Gi0/1 ---> Gi0/49 Switch.Router is connected to HQ through MPLS network. DHCP server is in the HQ. So we are planning to start PnP solu...
I am looking at using EasyQOS to deploy our QOS policy but in my test setup EasyQOS does not deploy NABR2 on my switches that support NBAR2 such as the 3650, 3850. Does anyone know if this is a known issue or am I not enabling something som...
Resolved! APIC-EM REST (GET) call via PoweShell
Hi Team, I'm trying to execute an APIC-EM REST (GET) call via a PowerShell script.The APIC is self-certified hence I had to use the first bulk of code lines (the actual code is in Green color):[System.Net.ServicePointManager]::CheckCertificateRevocat...
Hi all,I found this script and I have the issue to understand where I can change myvlanrange.Any ideas?Thanks.# createNewStudent-* tenantsfromcobra.mit.access import MoDirectoryfromcobra.mit.session import LoginSessionfromcobra.mit.request importConf...
I am in the process of standing up a two node cluster. When I left yesterday for the day, the configuration wizard on the second controller was at "Re-balancing services..." and looking at the status bar I would guess it was somewhere need 90% compl...
Hello,while I was deploying IWAN app few bugs happened;1) can't change or delete IP Adress Pools2) Can't configure HUB or "Save & Continue"Tried with Firefox, Chrome and Opera, APIC-EM version 1.1.2.15.How to solve that problems in order to continue ...
I have a WS-C3750x-24s running the image c3750e-universalk9-mz.152-3.E3. I am using APIC-EM PnP v1.3.3.126 to upgrade the IOS and push the config to it. But the image upgrade takes over 40 minutes to complete and resulting in error "Failed health...
Hi,I have a problem with updating my APIC-EM.My APIC-EM version is 1.4.1.1159 and I'm trying to update to 1.5.0.1368 but after uploading it prints error "Release upgrade package file validation failed. File seems to be corrupted"Then I tried to updat...
Hi,Ive been setting up locations in my topology map and just recently added my WLC and APs. The devices have successfully been added to the device inventory but for some reason when I add them to my Main Office location I am unable to see them in the...
