Edge Computing Infrastructure

Hi, i'm having trouble getting an IP for an IOx application using bridge network while it works correctly on the NAT interface.DHCP pool is correctly configured but only the Local manager is getting the IP from that.I've attached a tech support repor...

Hi there, I have some problems adding a new IR809 into FogDirectory. It was freshly installed with the bundle named ir800-universalk9-bundle.SPA.156-3.M2.bin ( IOX: Cisco-GOS,version-1.3.2.3 , IOS: version 15.6 )As I've searched until now, it looks l...

Hi All, I have an IOx Application with the following Package.yaml. I have no idea why but everything seems to load in fine but the target parameter doesn't seem to start. If I open a console and run it, the app runs fine. However the moment I close t...

HI,which are the file to deploy in router?Do we need to create package?yes then which are the files of python code,,yml.ini.can we get gps data on server ?

HI,which are the file to deploy in router?Do we need to create package?yes then which are the files?can we get gps data on server ?

We installed CGM - SRV in CGR 1120 and moved Ubuntu with GuestOS.Even if a USB device is connected to CGM - SRV 's USBPort, it will not be recognized as a device.Message is not displayed in lsusb / var / log / syslog.Please tell me how to make it rec...

CGR1120のCGM-SRVに搭載されているUbuntuにUSBのデジタル加速度計を接続してデータを取得しようとしております。しかし、CGM-SRVのUBSPortにデジタル加速度計を接続しても認識されていない状況です。接続しようとしているUSBの加速度計については、他のUbuntuですと以下のように認識されます。syslog=======May 11 18:18:25 ubunote kernel: [ 125.714933] usb 2-6: new full-speed USB devi...

For some reason I can't post a reply to thread How to set Static IP address to PaaS/LXC ; starting a new discussion.Is is possible to package the activation payload data for push from Fog Director?Thank you,Nick

Hi guysI have Cisco IR809 and would like to set modbus gateway to convert ModbusTCP packet to ModbusRTU that direct attached on interface async 0.MODBUS/RTU(Slave)------------(rs485)----------IR809---------------(ethernet)------------MODBUS/TCP(Maste...

I try the demo apps provided by the sdk, but those are not java apps, now I have a java app needed to run in a LXC container, anyone how could I do to make it success? thank you.

Hi,is there any 32Bit VM Available for usage on IR829?/tok

Hi, I'm trying installing a package on IR829 but i'm getting this error from IOXclient and Fog director:     Error processing command :  Post https://10.10.20.2:8443/iox/api/v2/hosting/apps: remote error: bad record MACI've already tried to uninstall...

Hi,We are running the Cisco 819 with the image "c800-universalk9_iox-mz.SPA.155-2.T.bin" and are now trying to configure a 4G WAN connection.  The router does not recognise the SIM card and I receive a log when the router boots up.LATFORM-4-CELLULAR_...

We had the guest OS running fine on the 156-3.M and M1b version, but upgrading to the lastest seems it does not want to start. Doing a bundle install on this fineir800-universalk9-bundle.SPA.156-3.M2.binWe tested to download the image directly and un...