Catalyst IE3200 NAT

[ehouston]

Does the Catalyst IE-3200-8T2S-E support NAT. I was told this device supports NAT pre-sale and it appears it does not after configuration.  If it does not support NAT is there a firmware upgrade to add this feature? 

[balaji.bandi]

check this guide may help you :

https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3X00/software/17_3/b_security_17-3_iot_switch_cg/m_16_12x_l2nat.html

[Albert Mitchell]

IE3200 does not support L2NAT.   

the datasheet does not claim support.  the IE3300 and IE3400  support L2NAT.

None of the IE3200/3300/3400 support NAT with Layer4 port address translation(PAT).  

L2NAT is IP address translation only used for 1:1 public to private.  if you requier 1:N public to private teh IE switches do not support

[ehouston]

Thanks Albert, I appreciate the confirmation. This is a hardware constraint correct?

[balaji.bandi]

yes, that is what the document describes.(have you got a chance to look the document provided in the post ?)