cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
684
Views
10
Helpful
3
Replies
Highlighted

IE1000 (or IE2000) - SFP Optical Transceiver DOM Data Available?

All:

 

Another pre-sales question:

 

In follow-up to my previous post (1) about Optical Transceiver Monitoring  (which is just automatic syslog event creation based on automated monitored of DOM data), I wanted to ask:

 

1) Does the IE1000 (or IE2000) series support displaying of SFP Transceiver DOM data for DOM-enabled SFP/Optics?

2) Is that data visible from the switch's WEB interface?  Or just via CLI? 

 

If anyone has one online, remotely accessible, would you care to share a screenshot?

 

I cannot seem to find much in the way of documentation about the CLI or Web interface ("Device Manager") running on either platform.

 

Thanks! ~~Brian

 

1. https://community.cisco.com/t5/forums/postpage/board-id/6016-discussions-lan-switching-routing

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Cisco Employee

the IE2000 does support DOM.   the datasheet for ie2000 lists which SFPs are DOM capable.

 

the IE1000 does not support DOM. 

 

View solution in original post

Highlighted

output from an IE2000

 

IE2000-8TC-G#show inventory

NAME: "1", DESCR: "IE-2000-8TC-G-E"

PID: IE-2000-8TC-G-E   , VID: V01  , SN: FDO1646T079

 

NAME: "IE-2000-8TC-G-E - Module", DESCR: "IE-2000-8TC-G-E - Module"

PID: IE-2000-8TC-G-E   , VID: V01  , SN: FDO1646T079

 

NAME: "GigabitEthernet1/1", DESCR: "1000BaseSX SFP"

PID: GLC-SX-MM-RGD       , VID: V02  , SN: FNS193910HX

 

 

IE2000-8TC-G#show int gigabitEthernet 1/1 transceiver detail

ITU Channel not available (Wavelength not available),

Transceiver is internally calibrated.

mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.

++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.

A2D readouts (if they differ), are reported in parentheses.

The threshold values are calibrated.

 

                              High Alarm  High Warn  Low Warn   Low Alarm

          Temperature         Threshold   Threshold  Threshold  Threshold

Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)

--------- ------------------  ----------  ---------  ---------  ---------

Gi1/1       30.6                95.0        85.0       -40.0      -50.0

 

                              High Alarm  High Warn  Low Warn   Low Alarm

           Voltage            Threshold   Threshold  Threshold  Threshold

Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)

---------  ---------------    ----------  ---------  ---------  ---------

Gi1/1      3.33                  3.63        3.47        3.14       2.97

 

           Optical            High Alarm  High Warn  Low Warn   Low Alarm

           Transmit Power     Threshold   Threshold  Threshold  Threshold

Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

---------  -----------------  ----------  ---------  ---------  ---------

Gi1/1       -5.0                 0.0        -3.0        -9.5      -13.5

 

           Optical            High Alarm  High Warn  Low Warn   Low Alarm

           Receive Power      Threshold   Threshold  Threshold  Threshold

Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

-------    -----------------  ----------  ---------  ---------  ---------

Gi1/1       -6.2                 3.0         0.0       -17.0      -21.0

 

 

Switch Ports Model                     SW Version            SW Image

------ ----- -----                     ----------            ----------

*    1 10    IE-2000-8TC-G-E           15.2(6)E2a            IE2000-UNIVERSALK9-M

 

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

the IE2000 does support DOM.   the datasheet for ie2000 lists which SFPs are DOM capable.

 

the IE1000 does not support DOM. 

 

View solution in original post

Highlighted

Thanks.

 

Trying to order an Optical equipped IE2000 now for lab.

 

If you have a chance, an you share sample output of:

 

ie# show int X/Y transceiver detail

 

(Or possible a screenshot from the Web interface -- for my colleagues )

Highlighted

output from an IE2000

 

IE2000-8TC-G#show inventory

NAME: "1", DESCR: "IE-2000-8TC-G-E"

PID: IE-2000-8TC-G-E   , VID: V01  , SN: FDO1646T079

 

NAME: "IE-2000-8TC-G-E - Module", DESCR: "IE-2000-8TC-G-E - Module"

PID: IE-2000-8TC-G-E   , VID: V01  , SN: FDO1646T079

 

NAME: "GigabitEthernet1/1", DESCR: "1000BaseSX SFP"

PID: GLC-SX-MM-RGD       , VID: V02  , SN: FNS193910HX

 

 

IE2000-8TC-G#show int gigabitEthernet 1/1 transceiver detail

ITU Channel not available (Wavelength not available),

Transceiver is internally calibrated.

mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.

++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.

A2D readouts (if they differ), are reported in parentheses.

The threshold values are calibrated.

 

                              High Alarm  High Warn  Low Warn   Low Alarm

          Temperature         Threshold   Threshold  Threshold  Threshold

Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)

--------- ------------------  ----------  ---------  ---------  ---------

Gi1/1       30.6                95.0        85.0       -40.0      -50.0

 

                              High Alarm  High Warn  Low Warn   Low Alarm

           Voltage            Threshold   Threshold  Threshold  Threshold

Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)

---------  ---------------    ----------  ---------  ---------  ---------

Gi1/1      3.33                  3.63        3.47        3.14       2.97

 

           Optical            High Alarm  High Warn  Low Warn   Low Alarm

           Transmit Power     Threshold   Threshold  Threshold  Threshold

Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

---------  -----------------  ----------  ---------  ---------  ---------

Gi1/1       -5.0                 0.0        -3.0        -9.5      -13.5

 

           Optical            High Alarm  High Warn  Low Warn   Low Alarm

           Receive Power      Threshold   Threshold  Threshold  Threshold

Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)

-------    -----------------  ----------  ---------  ---------  ---------

Gi1/1       -6.2                 3.0         0.0       -17.0      -21.0

 

 

Switch Ports Model                     SW Version            SW Image

------ ----- -----                     ----------            ----------

*    1 10    IE-2000-8TC-G-E           15.2(6)E2a            IE2000-UNIVERSALK9-M

 

View solution in original post

This widget could not be displayed.