Hi, I am trying to access the IR1101 that just arrived from Cisco with your default configurations, but I am not getting access the equipment via console because it is asking me the username and password that came configured from Cisco. I tried admin...
Forum Posts
Resolved! Cisco IG20R Rugged Series IoT Gateways
I have been researching Cisco IG20R Rugged Series IoT Gateways and other similar models. I wanted to know if we can control the devices (example PLCs) connected to the IoT Gateway or we can only monitor the status of the device. I am looking to buy a...
I am trying to connect over USB console cable to an IR1101. I am using the silicon labs driver as suggested. I can get onto router, but all input is masked. I have tried changing baud rates, 9600 is the only one that is not garbled. I have had succes...
Hello a question does someone know is this unit also working as a gateway say lake a repeater so to sent from on-site the 8xx signal to a 915 signal?
HelloIn case someone has already made this configuration, it is possible to create VRFs on an IE5000 with Key LAN Base Software?In the device datasheet, it indicates that for VRF-lite functionality IP services license is required. But the switch give...
All: Give the recent security advisories on the IE3000/IE4000/IE2000: One might ask: When can we expect to see an IP/Ethernet(MAC) ACL available to restrict communications with the CIP / EthernetIP and/or ProfiNet functions (which run on the cont...
Resolved! ESS3300 and Macsec
Hi there, Is the Cisco TrustSec Macsec ("Cisco SAP") supported in the ESS3300-switches? According to the release notes it should be supported I reckon, but for some reason I fail to configure it:https://www.cisco.com/c/en/us/td/docs/switches/lan/cisc...
Resolved! Linux VPN versus Cisco Router
Hi I need to connect a Linux client using 4g to a remote Cisco Router that have a static ip pubblic can anybody give me a sample configuration ?I can use the anyconnect client on Linux machine the cisco router is a CP-1111 series with cisco IOS XE 1...
Spoiler Hi Team,What is the best option to choose a Cisco industrial switch that provides connectivity to Cisco Fluidmesh 4500 MOBI equipment? We need at least 12 available Ports with M12 X-code connector and at least 2 PoE/PoE+ Ports available.Toda...
Hi TeamSome help here, please.What version of IE-3400H-16T-A series switch support PoE+ and M12X code Connector?We need to replace the actual IE2000 series switch on our mining fleet Drills to interact with the New Cisco Fluidmesh FM4500 Mobi APs (to...
I'm having an issue connecting a allenbradley controllogix plc to a IE3300 using CIP & EDS file provide on-board the device.I'm able to communicate with the device fine with RSlinx but no matter my connection type in the controllogix I'm unable to ge...
Hello, I can't connect to a Cisco IR510 WPAN Gateway's console port (Console port (RJ45)).I am using an Asunflower 6Ft Ftdi USB to Serial / Rs232 Console Rollover Cable for Cisco Routers - Rj45 cable.I follow documentation https://www.cisco.com/c/en/...
Good afternoon, We have very recently purchased a Cisco IE1000. It has been configured with IP 192.168.3.20/24 with no default gateway (as there is no route out of the network). There is no DHCP on this network, and therefore everything is given a st...
Hello,I am currently looking at buying the IR1101 Base Unit then attaching the IRM-1100-SPMI which allows an MSata to be installed. Currently I can only find the following for the expansion module: Highlights of the mSATA Pluggable Module are: ...
When I go into Industrial Networking Sandbox with IE3400 Lab and RDP into the Devbox I try and HTTPS into the WEBUI of the IE3400 Umbrella pops up and blocks the connection. Doug
