cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2115
Views
0
Helpful
5
Replies

2951 CUBE license

Syed
Level 3
Level 3

Dear All,

We have recently bought cisco 2951 router with licenses ipbasek9, securityK9 & UCK9 preloaded, but I could also see unified border element enterprise license - 5 sessions. 

Find the show license info from router, and I do not find anything related to CUBE from this output. May I know what does CUBE - 5 sessions mean?

I would also like to know whether clear license agent counters/sessions will remove all the licenses that are loaded on this router or not?

Please find the attached image for your information.

yourname#show license

Index 1 Feature: ipbasek9

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 2 Feature: securityk9

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 3 Feature: uck9

        Period left: Life time

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Medium

Index 4 Feature: datak9

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 5 Feature: gatekeeper

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 6 Feature: LI

Index 7 Feature: SSL_VPN

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: 0/0  (In-use/Violation)

        License Priority: None

Index 8 Feature: ios-ips-update

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 9 Feature: SNASw

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 10 Feature: hseck9

Index 11 Feature: cme-srst

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: 0/0  (In-use/Violation)

        License Priority: None

Index 12 Feature: WAAS_Express

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 13 Feature: UCVideo

        Period left: Not Activated

        Period Used: 0  minute  0  second

        License Type: EvalRightToUse

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Thanks in advance

Regards,

Syed

2 Accepted Solutions

Accepted Solutions

Cisco can't programmatically enforce the limit at this time. In most cases, the expectation is that simultaneous calls to the PSTN will not exceed the license count. 

If you desire to do so, you may limit this with your SIP provider or another way.  Alternately, you can set no limit and then order additional licenses based on your usage.

Hope this helps!

View solution in original post

Hi Syed,

There are PAK ids for CUBE Session licenses but no need to install anything as such as mentioned here, these are paper licenses. But the expectation is that you are not crossing the maximum session limitation although there are no restrictions as such. More details on the session license PAK and FAQs can be found in the below link:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-licensing.html

HTH

Rajan

View solution in original post

5 Replies 5

nathanjgrace
Level 1
Level 1

CUBE licenses are Right To Use and are honor-based. You won't see anything in the output tO correlate it. 

The license count is the max number of simultaneous calls which utilize the UBE technology. 

Thank you Nathan!

Max number of simultaneous calls which utilize the UBE technology??

Could you give an example to understand it better, please?

Also, there won't be any separate PAK for CUBE license, am I right?

Cisco can't programmatically enforce the limit at this time. In most cases, the expectation is that simultaneous calls to the PSTN will not exceed the license count. 

If you desire to do so, you may limit this with your SIP provider or another way.  Alternately, you can set no limit and then order additional licenses based on your usage.

Hope this helps!

Hi Syed,

There are PAK ids for CUBE Session licenses but no need to install anything as such as mentioned here, these are paper licenses. But the expectation is that you are not crossing the maximum session limitation although there are no restrictions as such. More details on the session license PAK and FAQs can be found in the below link:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-cube-licensing.html

HTH

Rajan

Thank you so very Rajan.

This link gives more detailed info.

Appreciate you help.