IP Telephony and Phones

Is it necessary to buy SWSS upgrade contract for ip phone since 2nd years or later ? we already have Smartnet contract for our Call Manager and suppose we can download latest firmware for phones. So do we still need to buy SWSS upgrade contract (part...

We are running CUCM/Unity 11.5. We have several departments that have on-call cell phones that they pass to another team member each week. I would like to be able to setup a rotating schedule for after hours calls to forward to the cell phone of the ...

Performed an update to sipdx70.10-2-5-212 this past weekend and we have several DX70s behaving poorly after that. The phone registers and is functional for a minute or two after reboot. Then it looses network connectivity. These are the console logs...

Hi, I currently have CUBE setup to my SIP provider, I would like to add an additional register or user agent. However since my current service provider uses outbound proxy for the invite messages I'm running into issues with the second UA.So I'd like...

we have cisco attendant console advanced 10.5 when the call shows in client screen the we unable to answer it, its keep ringing , and the answer button shows hidden , after we restart the PC its working fine for few minutes and the status changed fro...

Hello All, since yesterday one of our PRI is coming up and going now for every 15 - 20 mins below is the output. Nov 16 12:51:18.101: %CONTROLLER-5-UPDOWN: Controller T1 0/0/0, changed state to upNov 16 12:51:20.101: %CONTROLLER-5-UPDOWN: Controller...

I have 3 numbers that are forward in a loop, what they are wanting me to do is if all of them are on their phones they want it to give a busy signal instead of call waiting.   2288 (go to 2287 if she on phone)if she's on phone it goes to 5364 if she'...

I have CUCM 11.0.1.22900-14 and AD 2012 R2.  Trying to setup the Synchronization between two. CUCM Is able to connect the LDAP Server but none of the user populates. Based on search on forums i have confirmed that last name is not empty in the AD and...

Hello all, We have two DX650, one in HO (local to CUCM) and one in remote site (over MPLS WAN).When Dx650 from HO call to DX650 in remote site DX650, DX650 rings but is not able to press answer key. When press Answer key nothing happened and phone ke...

Hello, I've been working on a VOIP project for a while now using CME 10.0 on a cisco router 2900. The Lab part worked perfectly that is my phones optained the IP address, firmware from the router and calls could be emitted from one phone to another....

Hello, is it a way to use "Mobility" functionnality on a CUCI Lync client, like we use on an deskphone? That is to say, when I receive a call with SNR activated, I answer the call on my CUCI Lync client. And now I want to pass the call to my mobile ...

Today I had a fight with an ATA 190. After I powered the critter up it autoregistered itself with the CUCM 8.6 but after that it failed to register; it stayed "rejected".Probably it has something to do with this bug.The ATA did not load the newer fir...