3Com SIP Handsets on CUCM 8.x

[stafford.slater]

Hi There,

Has anyone ever managed to get 3Com 3101 or 3102 SIP phones working in CallManager 8.

Thanks,

Stafford

[Tapan Dutt]

Hi

No matter whichever Non-Ciscophone you trying to configure with CUCM it will follow steps mentioned at:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

HTH

Tapan

[joro]

Stafford,

Did you manage to add 3COM 3101/3102 within your CUCM? If "yes" what did you exactly do?

Thank you.

George

[ronpatel]

Hi All,

As Tapan said, Procedure to add any third party SIP phone is same through out CUCM releases.

But Only below mentioned third party SIP phones are test to work with CUCM fully. So 3Com 3101 or 3102 SIP may work but with limitations.

http://www.tekvizionlabs.com/3rdpartyprograms/sip_verification/verified_products.php

Regards

Ronak Patel