10-22-2014 06:26 AM - edited 03-17-2019 12:39 AM
The wall-mount bracket for the 7821 and 7841 phones (CP-7800-WMK=) is non-locking.
Does Cisco or a 3rd party have a locking wall mount option?
10-22-2014 10:54 AM
Hey Mike,
Hope this helps:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_0111.html
Rgds
10-22-2014 11:16 AM
Hi,
Sorry, that does not answer my question. The document you referenced illustrates how to install the NON locking wallmount bracket.
I'm looking for a LOCKING wallmount bracket.
Thank you,
Mike
10-22-2014 06:19 PM
Hi Mike
The part is CP-7800-WMK and is you can buy on internet on several places. It's compatible with your phone models 7821 and 7841
Rgds
10-23-2014 04:57 AM
Hi, if you look at my original question, you will see that I know the part number for the NON LOCKING wall mount kit (CP-7800-WMK=).
I am looking for a wall mount kit for these phones that LOCK. It appears the only one Cisco has available does NOT lock.
10-23-2014 08:15 AM
Hey mate,
Sorry but i cannot find this.
Best of luck
Rgds
06-26-2018 07:35 AM
Hi Mike - I know it's been a few years since you asked the question, but have a similar situation - did you come up with any third party brackets? Or did you have to finagle something?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide