7940G and Expansion Module 7914

[william_lithgow]

The expansion Module 7914 can Work with IP Phone 7940G?

[AJAZ NAWAZ]

according to this data sheet on the 7914, it would appear not to be supported.

hth,

Ajaz

[Rob Huffman · Accepted solution]

Hi William,

Ajaz is correct :) Mant people have tried this setup over the past few years but it will not work. Have a look towards the end of this doc (I believe the 7914 is only compatible with 7960,7961,7970,7971);

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008066e11e.html

Hope this helps!

Rob