04-04-2012 04:00 AM - edited 03-16-2019 10:28 AM
Hello guys,
I registered 9971 and CIPC+CUVA to CME 9.0 (c3900-universalk9-mz.SPA.152-2.T1.bin).
I also have a CIPC+CUVA registered to a CUCM 8.5.1.10000-26.
I try H.323 trunk and SIP trunk to connect the CME and CUCM.
CME CIPC+CUVA works flawlessly, it can call CUCM CIPC+CUVA either using H.323 trunk or SIP trunk (audio and video).
CUCM CIPC+CUVA can call to CME CIPC+CUVA either using H.323 trunk or SIP trunk (audio and video).
Unfortunately, CME 9971 cannot call to CUCM, neither using H.323 trunk nor SIP trunk, it just terminate the call (no busy tone or anything).
Later, I tried to register the CME to gatekeeper, and the CME 9971 can call another CME (audio only), but still, not to CUCM.
Have anyone tried this? Is it possible for a CME 9971 to call CUCM phones?
Thank you for helping.
Regards,
Christian
04-04-2012 04:07 AM
It should be possible.
You may have a configuration problem but without seeing config or traces it's impossible to say which.
04-04-2012 06:31 AM
Hi Paolo, please check this configuration, thank you for your response.
aaa new-model
!
aaa authentication login h323 local
aaa authorization exec h323 local
!
aaa session-id common
clock timezone WIB 7 0
no network-clock-participate wic 0
!
no ipv6 cef
!
ip cef
multilink bundle-name authenticated
!
crypto pki token default removal timeout 0
!
voice-card 0
!
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 3600 min 120
!
voice class codec 1
codec preference 1 g729r8
!
voice register global
mode cme
source-address 10.205.27.100 port 5060
max-dn 10
max-pool 10
load 9971 sip9971.9-2-2SR1-9
timezone 43
create profile sync 0000551470218046
camera
video
!
voice register dn 1
number 8001
name John Chambers
label John Chambers
!
voice register dn 2
number 8002
name Michael Jackson
label Michael Jackson
!
voice register pool 1
id mac 001D.70FB.168B
type 9971
number 1 dn 1
presence call-list
dtmf-relay sip-notify
username cisco password cisco
no vad
camera
video
!
voice register pool 2
id mac 44E4.D944.9BF6
type 9971
number 1 dn 2
presence call-list
dtmf-relay rtp-nte
username cisco1 password cisco1
no vad
camera
video
!
voice translation-rule 1
rule 1 /^9$/ /8100/
rule 2 /^3958/ /8/
rule 3 /^3959/ /9/
!
voice translation-rule 2
rule 1 /^\([4-8]...\)$/ /395\1/
!
!
voice translation-profile LOCAL
translate called 1
!
voice translation-profile OUTGOING
translate calling 2
!
application
service aa flash:/CME/IVR/app-b-acd-aa-3.0.0.2.tcl
param number-of-hunt-grps 1
paramspace english index 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 2
param max-extension-length 4
param aa-pilot 8999
paramspace english location flash:/CME/IVR/
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 8100
param service-name queue
!
service requestpin flash:/CME/SCRIPTS/requestpin.tcl
param uid-len 5
!
service queue flash:/CME/IVR/app-b-acd-3.0.0.2.tcl
param queue-len 10
param aa-hunt1 8100
param number-of-hunt-grps 1
!
!
username cisco password 0 cisco
username 12345 password 0 111111
!
interface GigabitEthernet0/0
ip address 10.205.27.100 255.255.255.0
ip pim dense-mode
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip id CME-9971 ipaddr 10.204.206.252 1719
h323-gateway voip h323-id CME-9971
h323-gateway voip tech-prefix 1#
h323-gateway voip bind srcaddr 10.205.27.100
!
ip route 0.0.0.0 0.0.0.0 10.205.27.1
!
nls resp-timeout 1
cpd cr-id 1
!
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/dkern9971.100609R2-9-2-1.sebn alias dkern9971.100609R2-9-2-1.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/kern9971.9-2-1.sebn alias kern9971.9-2-1.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/rootfs9971.9-2-1.sebn alias rootfs9971.9-2-1.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/sboot9971.031610R1-9-2-1.sebn alias sboot9971.031610R1-9-2-1.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/sip9971.9-2-1.loads alias sip9971.9-2-1.loads
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-1/skern9971.022809R2-9-2-1.sebn alias skern9971.022809R2-9-2-1.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/dkern9971.100609R2-9-2-2SR1-9.sebn alias dkern9971.100609R2-9-2-2SR1-9.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/kern9971.9-2-2SR1-9.sebn alias kern9971.9-2-2SR1-9.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/rootfs9971.9-2-2SR1-9.sebn alias rootfs9971.9-2-2SR1-9.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/sboot9971.031610R1-9-2-2SR1-9.sebn alias sboot9971.031610R1-9-2-2SR1-9.sebn
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/sip9971.9-2-2SR1-9.loads alias sip9971.9-2-2SR1-9.loads
tftp-server flash:/CME/FIRMWARES/cmterm-9971.9-2-2SR1-9/skern9971.022809R2-9-2-2SR1-9.sebn alias skern9971.022809R2-9-2-2SR1-9.sebn
!
sccp local GigabitEthernet0/0
sccp ccm 10.205.27.100 identifier 1 version 7.0
sccp
!
sccp ccm group 1
!
dial-peer cor custom
name all
name fac
!
dial-peer cor list ALL-CALL
member all
member fac
!
dial-peer cor list FAC-Required
member fac
!
dial-peer voice 1 voip
corlist incoming ALL-CALL
translation-profile incoming LOCAL
incoming called-number .
voice-class codec 1
no vad
!
dial-peer voice 2 voip
corlist incoming ALL-CALL
translation-profile incoming LOCAL
shutdown
session protocol sipv2
incoming called-number .
no vad
!
dial-peer voice 11 voip
description IVR
service aa
destination-pattern 8999
session target ipv4:10.205.27.100
incoming called-number 8999
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 61 voip
description Outgoing Call to Other Branch
translation-profile outgoing OUTGOING
shutdown
destination-pattern 3.T
session target ras
voice-class codec 1
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 62 voip
description SIP Outgoing Call to CUCM
destination-pattern 3988888
session protocol sipv2
session target ipv4:10.204.27.222
dtmf-relay sip-notify
no vad
!
gateway
timer receive-rtp 1200
!
telephony-service
video
no auto-reg-ephone
max-ephones 10
max-dn 10
ip source-address 10.205.27.100 port 2000
service phone videoCapability 1
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Apr 04 2012 11:42:00
!
ephone-dn 1 dual-line
number 9001 no-reg both
label Tom - 9001
name Tom
!
ephone 1
video
mac-address AAAA.AAAA.AAAA
type 7975
button 1:1
04-04-2012 06:59 AM
Need traces to see why call if failing.
04-04-2012 07:10 AM
Hi Paolo,
What traces do you need? CUCM traces or CME debugs? Thanks.
Regards,
Christian
04-04-2012 07:15 AM
You should look the CME traces to begin with.
Anyway to be honest with you, this kind of issues are better dealt with the TAC. Discussion in a public forum cannot replace their work.
04-04-2012 07:21 AM
Hi Paolo,
Thanks for the suggestion, unfortunately, this is just a Proof of Concept for a customer, so I can't involve TAC at the moment, but I think I'll try contacting local Cisco engineer.
Please contact me if you hear something about this. Thanks.
Regards,
Christian
04-16-2012 12:13 AM
Hi Christian,
Where you able to solve this issue??
Rgds
- Victor
04-17-2012 01:17 AM
Hi Victor,
Several days and restarts later, the call suddenly worked. I didn't think I made any change to the configuration. Maybe it's just a glitch or something. Until now, I've been facing many weird problems with CME and 9971, if there's anybody successfully using this combination, please share your experience here. Thank you.
Regards,
Christian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide