cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
291
Views
5
Helpful
3
Replies
Highlighted
Beginner

Add DNs using CUCM 11.x BAT

I'm looking for a way to add DNs, and DNs only, using the BAT in CUCM 11.x. I have about 100 I need to Forward All and I think BAT would help save some time.

 

I have a CSV of phone exports, and I've grabbed the headers for the DN, Partition, Description, Alerting Name, etc. however when I import using BAT > Phones > Add/Update Lines > Add Lines, and import my CSV, I get a failure on PARTITION is not a supported field.

 

So I'm not doing something right. Can anyone suggest how to add DNs (and DNs only - no phone associated with it) with a FORWARD ALL DESTINATION 1 CUCM 11? 

 

Thanks!

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Re: Add DNs using CUCM 11.x BAT

Thanks. I ended up importing CTI RP's for this CF task.

3 REPLIES 3
VIP Advisor

Re: Add DNs using CUCM 11.x BAT

I checked BAT and there is no way to add only DN. i.e. not tied to a MAC or UDP

Please remember to rate useful posts, by clicking on the stars below.

Hall of Fame Cisco Employee

Re: Add DNs using CUCM 11.x BAT

If all you need is to CFA from a DN you can do that with a TP

HTH

java

if this helps, please rate
Beginner

Re: Add DNs using CUCM 11.x BAT

Thanks. I ended up importing CTI RP's for this CF task.

CreatePlease to create content
Content for Community-Ad
June's Community Spotlight Awards