01-18-2018 02:22 PM - edited 03-17-2019 11:59 AM
I'm looking for a way to add DNs, and DNs only, using the BAT in CUCM 11.x. I have about 100 I need to Forward All and I think BAT would help save some time.
I have a CSV of phone exports, and I've grabbed the headers for the DN, Partition, Description, Alerting Name, etc. however when I import using BAT > Phones > Add/Update Lines > Add Lines, and import my CSV, I get a failure on PARTITION is not a supported field.
So I'm not doing something right. Can anyone suggest how to add DNs (and DNs only - no phone associated with it) with a FORWARD ALL DESTINATION 1 CUCM 11?
Thanks!
Solved! Go to Solution.
01-21-2018 02:22 PM
Thanks. I ended up importing CTI RP's for this CF task.
01-18-2018 04:23 PM
I checked BAT and there is no way to add only DN. i.e. not tied to a MAC or UDP
01-18-2018 07:52 PM
If all you need is to CFA from a DN you can do that with a TP
01-21-2018 02:22 PM
Thanks. I ended up importing CTI RP's for this CF task.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: