cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1210
Views
5
Helpful
2
Replies

Adding multiple phones/users to CUCM 11.5

BigK
Level 1
Level 1

Hi all,

I have users (about 21) in new location that I need to add to CUCM 11.5.

All the users are in LDAP. I also got new DID numbers.

The users/phones are in different location then I.

I would like to know the easy and simple way to add users/phones to CUCM.

I am thinking of creating phones/users template in Bulk Administration and then export the files, I luck the experience and would like some help to achieve that.

 

Thanks

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

You can use BAT for both, for users if they're local users.

You can simply do an export and use it as a sample.

 

You can do self-provisioning, or just auto-registration and then manually adjust the settings as required.

Or you can do it manually per device.

HTH

java

if this helps, please rate

View solution in original post

2 Replies 2

Jaime Valencia
Cisco Employee
Cisco Employee

You can use BAT for both, for users if they're local users.

You can simply do an export and use it as a sample.

 

You can do self-provisioning, or just auto-registration and then manually adjust the settings as required.

Or you can do it manually per device.

HTH

java

if this helps, please rate

Did it manually and was easy. Thanks for Quick reply Jaime