02-08-2018 05:27 AM - edited 03-17-2019 12:09 PM
hi
we have a ANN that plays "Your call is being recorded" using ECC/CURRI
If called internally we hear the full message
If called externally we hear "is being recorded"
Any idea?
thanks
02-08-2018 05:31 AM
02-08-2018 05:33 AM
no cube. we are using voice provider over sip trunk.
PRACK is enabled as it has to be enabled in order to hear the ANN.
02-08-2018 05:35 AM
02-08-2018 05:40 AM
externally
VoiceProvider->SIP Trunk CUCM->called DN (ECC profile)
Internally
calling DN -> called DN (ECC profile)
ECC profile goes to a CURRI server
02-08-2018 06:16 AM
02-08-2018 08:31 AM - edited 02-08-2018 09:45 AM
see attached
02-08-2018 08:57 AM
02-08-2018 08:58 AM
tftp
02-08-2018 09:47 AM
02-08-2018 12:48 PM
02-09-2018 02:26 AM
02-10-2018 05:07 AM
02-12-2018 02:15 AM
Hi,
I setup our test sip trunk to use subscriber .23 and use ANN on .23.
the .149 is our signaling to ITSP and .13 is our rtp to ITSP.
Am I right saying that 24986 is the ANN message?
Should i go after prack?
thanks
02-12-2018 07:27 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide