Hi, I also have a requirement to upgrade from 6.1.2 to 10. Is the best way to do an upgrade to 6.1.5 then pcd to 10 as it seems that the earliest pcd support is 6.1.5 or a "jump" upgrade to 9 then pcd to 10?
In order to restrict our coversation to the Routing Enhancement & Platform topic, I request you to post the same query on the blog where we can have a detailed discussion on upgrade & PCD which can be leveraged by other CSC users as well.
I've couple of queries regarding PCD..
1. Do we need to assign IP address to PCD ?
2. How can we get the PCD tool, I mean is it downloadable or it comes with CUCM ISO CD ?
Id be happy to answer your question. However, in order to restrict our coversation of this Ask the Expert to the Routing Enhancement & Platform topic, I kindly request you to post the same query on the blog where we can have a detailed discussion on upgrade & PCD which can be leveraged by other CSC users as well.
Thank you for your understanding.
I have just completed a project where I used E.164+ DN's for all devices and had issues with the inter-digit timer being activated due to overlaps between the DNs and Route Patterns such as \+.!
The new Urgent priority for DNs in 10.0 looks like it will resolve the issue. My question is whether there is ever a use case where DN's should not be urgent?
I cannot think of one and, to be honest, always had assumed that DN's would be treated as urgent anyway
Was this new feature brought in just to address this issue or are there other uses for it?
Is there a good reference for remaining gotchas for E.164+ based dialplans in 10.0? - one that I can think of is transfer to voicemail as the lead digit (typically *) cannot precede + in a dialled string.
Thats a good feedback.
We have been using Globalization only for past few years now.
Old setups will have the traditional Overlapping RP and CSS approach.
A lot of such issues were also workaround by reducing T302 timer, which has its own complications.
With the Globalization(\+.!) and +E164 deployments, we started getting more use case scenarios and TAC Service requests.
Hence, the need to have Urgent Priority for DN's.
As part of CUCM 10.0, Urgent Priority OR no Interdigit TimeOut has been implemented for :
I need to check, if we have any document, mentioning Cons of +E.164 deployments. I will update you, If I get one.
OR We might be able to get one, as a outcome of discussion on this ATE session
Just to add the points mentioned by Amit above, the Urgent priority does address the E+164 issue you spoke about. Infact this was a major use case driving this feature. Although there are other uses as well.
In regards to your question whether there is ever a use case where DN's should NOT be urgent. The administrator need to be careful in implementing it in countries that have over-lapping dial-plan.
Thanks & Regards
Hi Amet, similar issue CUCM 10.0 is using MIKEY or SDES for key exchange in SRTP? It is adjustable?
SRTP relies on an external key management protocol to set up the initial master key. Two protocols specifically designed to be used with SRTP are ZRTP and MIKEY. There are also other methods to negotiate the SRTP keys. There are several vendors which offer products that use the SDES key exchange method.
HTH, please rate all useful posts and right answers.
I am researching on this issue and will update you soon.
We can continue our discussion on the orignal thread posted by you.
I am sure, the 3rd party would have tested their product with CUCM, do they have any Configuration guide, which talks about Supported Versions and Confguration, Pre-Requisites.
•Currently only CTS supports DTLS.
You may check the following RFC: http://tools.ietf.org/html/rfc5764
Also, it should be worhwhile, checking with 3rd party product what they support.
Did you got the chance to check out my reply ? and the related RFC.
If any question, please do let me know.
James, You have every right to call it CallManager
Without the feedback coming in from you and our other partners and customer, we would not be able to Evolve the product, where we are now.
Thanks for your continued inputs and great discussions.
1) Have you guys had a chance to play with ILS especially new GDPR feature in CUCM 10.0? I have a customer with 3 cluster setup so I am thinking of leveraging GDPR feature to dynamic advertise the entire dial plan between clusters with a single SIP route pattern from each cluster pointing to SME v10. Can you please let me know if there are any know defects in CUCM 10.0 in relation to ILS/GDPR feature?
2) What is the latest 10.0 ES version out at the moment and are these ES's bootable? I am trying to avoid having to install base 10.0 and then upgrade to latest ES.
3) Can you please advise approx release date of 10.0 SU1?
4) Can you please advise approx release date of 10.5 and key features coming up in 10.5?
1> I was not able to find any know open caveat, in the ILS/GDPR feature, you may check the CUCM 10.0 Release notes:
2> We have 10.0(1) release at present but only available/orderable through PUT (UCSS Contract).
3> 10.0 SU1, expected release timeframe, May 2014, but it may vary based on any last minute changes.
4> CUCM 10.5 expected release date is End of March at this point.