07-16-2012 09:13 AM - edited 03-16-2019 12:13 PM
I want to register a Cisco ATA 186 with a Cisco Unified Call Manager Version 7. I would like register the ATA as a SIP device.
I found that I need firmware version 3.2(4) to register the ATA 186 with the CUCM 7. However, I can only find firmware 3.2(4)-SCCP. I can not find firmware 3.2(4)-SIP.
Does firmware 3.2(4)-SIP exist ?
How can I register the ATA as a SIP device with CUCM 7?
Thank you
Solved! Go to Solution.
07-16-2012 09:58 AM
The firmware for SIP is v2.16 I have attached it here for you..
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
07-16-2012 09:58 AM
07-16-2012 10:37 AM
Thank you for the reply
firmware v2.16 will work with Call Manager 7?
I found a chart on this thread, https://supportforums.cisco.com/message/3262362#3262362
It made me think that I needed 3.2(4) to support Call Manager 7
07-16-2012 11:46 AM
The Latest firmware for SIP is 3.2 and it is not compartible with CUCM 7. from the link you provided. SO i guess you can only do SCCP for now
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide