01-14-2019 04:48 AM - edited 03-17-2019 01:56 PM
One of our customer need to configure basic paging in CUCM 9.1
I check with CUCM version 9.0 cisco included basic paging functionlity which is provided by singlewire.
So, that means I do not need any extra hardware or software to implement basic paging(1 group with 50 phones).
Please clarify.
Thanks.
01-14-2019 05:09 AM
I believe the following post may be helpful to you
https://community.cisco.com/t5/other-collaboration-subjects/paging-with-cucm/td-p/3228472
George
01-16-2019 05:25 AM
Thank you so much George for your reply.
01-14-2019 05:26 AM
For basic paging functionality all you need is paging software from Single. Install it in your VM envinornment and configure, you can create multiple groups but only up to 50 devices can be added in total.
No additional hardware, software or licenses required.
01-16-2019 05:26 AM
Thank you so much syed for your reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide