BE6000 CUCM setup

[kpintens]

Hi all

I was wondering if we can do the following on 2 BE6000's

1 BE6000 will host a PUB and SUB, the other one a second SUB and UnityConnection.

The FAQ, states max 2 nodes but further down it says the cluster can hold more then 3.....

Thanks in advance

Koen

[Aman Soi]

Hi Koen,

BE 6000 consists of the following foundational elements:

• Cisco Unified Communications Manager
• IM & Presence
• Cisco Unity® Connection
• Cisco Prime Provisioning
• Cisco UC Virtualization Hypervisor
• Cisco Unified Computing System C200 M2/C220 M3 Rack-mount server.

Following applications can be optionally added to Cisco Business Edition 6000 solution.

• Cisco Unified Contact Center Express
• Cisco Unified Attendant Consoles
• Cisco Emergency Responder
• Cisco Telepresence Video Communication Server (Supported only with UCS C220 M3)
• Cisco Paging Server

Cisco Business Edition 6000 supports up to 4 UC applications plus 1 Cisco Prime Provisioning (from the list of applications above) running co-resident on single UCS C200 or UCS C220 hardware platform and supports full featured redundancy for all the core applications over a WAN or LAN environment.

you can refer the link

http://docwiki.cisco.com/wiki/Cisco_Unified_Communications_Manager_Business_Edition_6000

regds,

aman

[kpintens]

Thanks for that but that does not answer my question

2 nodes, can be PUB and SUB, or 2 BE6000's

our distributor says only PUB/SUB and not PUB/SUB/SUB, even staying below 1000 users

[Aman Soi]

Hi,

one one UCS chassis , you can install PB/SUB1 while on other UCS chassis, u can install SUB2/UCXN.

regds,

aman

[kpintens]

I know going to UCS or even UCS mini, but the BE6000 have been acquired already....

so we need to use those

[Chris Deren · Accepted solution]

This is perfectly fine and supported to have multiple BE6K servers.

[kpintens]

Thanks Chris