blanket setting

[tclaude]

Is there also a way to change a setting for all currently active devices.

This is for ip phones in CUCM

[Jaime Valencia]

You can use BAT, depending on the specific setting, you might be able to do it in one job, or might require multiple if it's a model specific setting as you'd need to do one job per phone model.

[Nithin Eluvathingal]

Specify the settings you would like to apply in bulk, and we can guide you. As @Jaime Valencia  mentioned, CUCM has options to do the settings in bulk.

[tclaude]

We want to apply wireless headset hook switch control to all our devices.

[Roger Kallberg]

As wireless headset hook switch control is a model specific setting you'd need to run a batch query job for each of the models of devices that you'd want to set this on.

[tclaude]

What we have tried so far in BAT did a phone wiery for device type contains 7841
Clicked next
Checked apply config instead of dont reset/restart phones/ apply config
Checked the box for wireless headset hookswitch control
Toggled it to enable
Checked run immediatly
Clicked submit

This did not work and the setting was not enabled

[tclaude · Accepted solution]

We figured out that BAT will not work as we are still running version 11 of CUCM this causes the "String index out of range: -13" error to appear. Thank you all for the replies