This is the config from an old 2921 that we are currently using as a SIP to PRI bridge for our FaxCore installation.service tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezone yearservice timestam...
Forum Posts
The "Cisco-Gucid" header exists in one call leg (first appears in the "100 Trying" response), but not in another (a new INVITE). I'm trying to use SIP profile to copy the header over (from dial-peer 2010 to dial peer 9012). But the result was - CUBE...
Please excuse my newbie approach to this, it's the first time I've posted here. Jabber will open as if it is going to launch, halts, then opens a window asking you enter information to download the log files. I have a attached photos.
Hi TeamsI have problem in my office DID, keep getting calls from a particular number. Below is the user complaint.This number 860-273-9969 Keeps calling me - it says its Aetna - But when i try to answer no one speaks and then immediately hangs up nev...
We have a CUCM 12.5 system with CER and a SIP trunk to a CUBE router and then on to the local cable company. We have an issue where an outside caller at number 111-111-1111 calls a phone on CUCM with DN 222-222-2222 that's forwarded to cell phone nu...
Friends,I would like to know the details of the A-Flex license usage. I purchased 1,400 licenses, but the current usage is shown below is confusing me. How can we calculate the license usage? What is the current usage?
Question - For MS Teams direct routing - I was wondering if you could help us understand how we can achieve WAN level redundancy with the 1:1 NAT option. For example, we have a site with two WAN internet circuits, and our requirement is that if one o...
I've got a Hunt Pilot 2688 created that will forward to voicemail box 2688 if not answered by the line group members after 30 seconds. The HP mailbox 2688 has an MWI created to light the indicator at phone ext 2658 (the lead line group member). The M...
Good day. I have some troubles with SAML SSO. I installed certificates, then I configured ADFS and CUCM to use SSO. And firstly all worked fine. I could login to CUCM and to Self-care portal with windows credentials. But there was a notifications at ...
Resolved! 3cx MPP to 3pcc for free
I just got my CISCO phone thinking it would just provision to 3CX manually, but no. I need a license to migrate to 3pcc if i don't want to get that i need to buy a 61 DOLLAR MIGRATION LISENCE? Unacceptable. i have the CP8845 V8. it took me 4 hours t ...
Hello everyone,I’m looking for a way to disable outgoing calls for a specific extension (Extension 2) on a Cisco 8851 with Multiplatform Firmware (MPP). It’s important that incoming calls continue to work as usual.I’m not using CUCM or provisioning f...
Hello, good morning, I have issues with the incomming calls from PSTN to cisco phones that registered in CUCM, the caller id showing unknown on my cisco ip phone 7975 what should i modify in voice gateway or cucm to make the caller number appear on t...
I have a Cisco CP-7821-K9 IP phone that I recently converted to Third-Party Call Control (3PCC) to use with an alternate service provider. While most functionality is working properly, I'm experiencing a specific issue with outbound calls:Cannot make...
I'm running CUCME 14.1 (17.09.05e) on a 4321 in a lab environment. I've got SIP 8865 and SCCP 7975 for phones. I'm able to pull custom Desktop images to all phones from the local CUCME TFTP server. But, for some reason, the phones aren't able to see ...
My Cisco headset 562 stops working 6-10 minutes into the call. It makes a static sound and then it stops working. Is this possibly because the headset battery no longer retaining charge and if so, how can we replace the headset battery?
