BLF and Speed Dial on CCM5

[gadacha-fouad]

Hello,

I'm searching the way to configure BLF and Speed Dial from the ccmuser with the CCMV5. Is it possible ? If yes, how can I do ?

Thanks for your help

[mchandak]

Yes, this is possible. Here is the link which gives details about how to configure it http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/sys_ad/5_0_4/ccmfeat/fsprsnc.htm#wp1109780

[khchiang]

Dear all,

under 5.0 (2000.1) was supported less 14 BLF on 7914, upgrade to 5.04(2130)which will solve it.

enable presence to allow (default restrict)

& change CCS to allow all.

[gadacha-fouad]

Thanks, but the question is:

Is it opssible for a user to configure their own speed dials and BLF from the ccmuser (not the ccmadmin) ?

Regards

[Rob Huffman · Accepted solution]

Hi Gadacha,

BLF/Speeddials can only be configured by the Admin :(

Hope this helps!

Rob