IP Telephony and Phones

Here's the scenario.A call comes in from the PSTN (site 1). The Call is set to forward to a user across the WAN to another CME System (using PLAR for example, to site 2). The Person picks up the phone (site 2) and transfers the call to another IP pho...

dear sir, Please help, anyone have any idea with the title mentioned? thanks.

I have a IP Telephony network (CM 4.2, Voice Gateway, IP Phones). the network is connected to internet through two stage firewalls ( First stage: PIX and second stage: MS ISA )I want to implmenet IP Communicator over VPN client dial-into the internet...

-2851 router IOS 12.4(11)T1-CME 4.0(2)I only hear beep sound when put on hold between internal IP phones. is it normal in my IOS and CME version?telephony-servicemoh music-on-hold.auThanks in advance,

I have two 7914 expansion module installed in a Cisco 7960 phone.This phone have a softkey template with 2 lines a 34 speed dials and in the field of expansion modules in phone configuration in CCM 4.1 are provided with expansion modules information....

I have a new 3825 router and has IOS Version 12.4(13r)T and CCME 3.3I want to upgrade to CCME 4.1 and the last IOS version.How can I do it? Is it possible to do it by the USB ports ?

hi folks,is there any way we can make two routers access same cue.we have two different sites and we want the 2nd site people to access their voicemails from site 1 cue.because of cost constraints we are looking into it

we have "Non-Cisco-IP-Phones" with Cat3560+PoE and TRUNK-Ports with 2 Vlans(one DATAvlan,one VOICEvlan)how is it possible to enable QoS (1st step: Classification and Marking) on this TRUNK-Ports with "service-policy input" (with class-map,policy-map)...

I have a CCM Cluster with 4 servers. Very much interested in knowing, what do you all provide as the CCM User web page to end users. In the past, i have given the Publisher's URL to end users for the CCM User webpage. Do you usually give out to end ...

I have configured an IP phone (extension 100) for receiving all the incoming calls of my CME 3.3 Then I have configured it to forward calls to another IP phone ( extension 112 )when it's busy or no answered.The problem is that this command only runs...

Hi Gurus,We just finished setting up a small office network. Our ISP will supply the phone system however they want that we reconfigure network for a vlan to separate the data and voice lines. We would like to start a separate data/voice vlan for LAN...

Can I set up meeting place to point at AD (my callmanager is not integrated with AD) I can't seem to find details on how to do this. so users can log on with there AD account and be able to search email address from the invite section when scheduling...

New install, UM unity connected to off-box exchange server 2003 SP2. New subscribers imported from Exchange, but new voice messages are not delivered to subscribers.Something strange also happpens and it's that when I check for new messages via TUI,...

CME 3.3.For example,User has 7960 with button 1 with extension 8001 single line. Then second button also has 8001 single line. I assign corlist to ephone-dn 1 with extension 8001 only access to long distance.Then I assign corlist to ephone-dn 2 wit...