cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1297
Views
0
Helpful
1
Replies

BLF in 7962 and expansion module

ciscoroyzhang
Level 1
Level 1

                   Hi there,  I have setup 7962 with one expansion module for a branch office. all user's extension has been configured as SD in the Expansion module. it works fine. Now new receptionist ask for the BLF on the button of Expansion module, so when user is in a call,  she can see the light on and no need to forward call to them.  Please advice if there is any features available in CUCM 8.6 that I can use to achive those. 

Thanks

Roy

1 Accepted Solution

Accepted Solutions

George Thomas
Level 10
Level 10

You should be able to configure BLF SD to achieve this.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652

Sent from Cisco Technical Support iPhone App

Please rate useful posts.

View solution in original post

1 Reply 1

George Thomas
Level 10
Level 10

You should be able to configure BLF SD to achieve this.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652

Sent from Cisco Technical Support iPhone App

Please rate useful posts.