04-17-2017 03:18 AM - edited 03-17-2019 10:04 AM
I use 8811 with CME v11.6.
Call Forward All softkey is not displayed other than primary line.
How can I display it and make it work on non-primary line?
[Voice Register Global]
voice register global
mode cme
source-address xxx.xxx.xxx.xxx port 5060
privacy-on-hold
timeouts interdigit 5
max-dn 120
max-pool 30
load 7841 sip78xx.11-7-1-17
load 8811 sip88xx.11-7-1-17
load 8831 sip8831.10-3-1SR3-5
timezone 44
time-format 24
date-format D/M/Y
hold-alert
tftp-path flash:
create profile sync 0000243569073841
ntp-server zzz.zzz.zzz.zzz mode unicast
conference hardware
auto-register
[Voice Register Template 1]
voice register template 1
softkeys hold Resume Newcall
softkeys idle Pickup Newcall Cfwdall Redial Gpickup
softkeys ringIn Answer
softkeys seized Endcall Redial Pickup Gpickup Cfwdall
softkeys connected Hold Endcall Trnsfer Park Confrn
softkeys remote-in-use Newcall
conference drop-mode local
conference admin
transfer max-length 12
[Status of Voice Register Global]
show voice register global
CONFIG [Version=11.6]
========================
Version 11.6
Mode is cme
Auto-registration is enabled
Max-pool is 30
Max-dn is 120
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Forced Authorization Code Refer is enabled
Source-address is xxx.xxx.xxx.xxx port 5060
Load 7841 is sip78xx.11-7-1-17
Load 8811 is sip88xx.11-7-1-17
Load 8831 is sip8831.10-3-1SR3-5
NTP Server Address is zzz.zzz.zzz.zzz
NTP Server Mode is: unicast
Time-format is 24
Date-format is D/M/Y
Time-zone is 44
Hold-alert is enabled
Mwi stutter is disabled
Mwi registration for full E.164 is disabled
Forwarding local is enabled
Video is disabled
Camera is disabled
Privacy is enabled
Privacy-on-hold is enabled
Conference hardware is enabled
Dst auto adjust is enabled
start at Apr week 1 day Sun time 02:00
stop at Oct week 8 day Sun time 02:00
Call List BLF is enabled
Max redirect number is 5
IP QoS DSCP:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for service
Telnet Level: 0
Tftp path is flash:/its
Generate text file is disabled
Tftp files are created, current syncinfo 0000243569073841
OS79XX.TXT is not created
timeout interdigit 5
timeout transfer recall 0
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
MWI unsolicited notify is disabled
Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Auto-Register requests : 0
Attempts to register
after last unregister : 0
Last register request time :
Last unregister request time :
Register success time :
Unregister success time :
[Status of Voice Register Template 1]
Temp Tag 1
Config:
Attended Transfer is enabled
Blind Transfer is enabled
Semi-attended Transfer is enabled
Conference softkey is enabled
Caller-ID block is disabled
DnD control is enabled
Video is disabled
Camera is disabled
Anonymous call block is disabled
softkey connected Hold Endcall Trnsfer Park Confrn
softkey hold Resume Newcall
softkey idle Pickup Newcall Cfwdall Redial Gpickup
softkey seized Endcall Redial Pickup Gpickup Cfwdall
softkey remote-in-use Newcall
softkey ringIn Answer
Lpcor type none
paging-dn 0 [multicast]
conference admin: yes
conference add mode: all
conference drop mode: local
Pool 1 has this template configured
Pool 2 has this template configured
Pool 3 has this template configured
Pool 10 has this template configured
Pool 11 has this template configured
[Status of Voice Register Pool 10]
Pool Tag 10
Config:
Mac address is C4B9.CDD8.38AE
Type is 8811
Number list 1 : DN 10
Number list 2 : DN 30
Number list 3 : DN 31
Number list 4 : DN 32
Number list 5 : DN 33
Proxy Ip address is 0.0.0.0
DTMF Relay is enabled, rtp-nte
Call Waiting is enabled
DnD is disabled
Video is disabled
Camera is disabled
Night Service Bell is disabled
Busy trigger per button value is 1
Description is 0677397502
keep-conference is enabled
registration expires timer max is 3600 and min is 60
username cisco10 password cisco
template is 1
kpml signal is enabled
Lpcor Type is none
Transport type is udp
service-control mechanism is not supported
Registration method: per line
Privacy feature is not configured.
Privacy button is disabled
conference admin: yes
conference add mode: all
conference drop mode: local
Reason for unregistered state:
No registration request since last reboot/unregister
paging-dn: config 0 [multicast] effective 0 [multicast]
Dialpeers created:
Statistics:
Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Auto-Register requests : 0
Attempts to register
after last unregister : 0
Last register request time :
Last unregister request time :
Register success time :
Unregister success time :
Best regards,
04-17-2017 06:45 AM
Hi,
See below for helps
https://supportforums.cisco.com/discussion/11065996/cfwdall-non-primary-line
(Rate if it helps)
JB
04-17-2017 08:50 AM
HI,
I've configured the CfwdAll softkey for seized state in voice register template 1.
But I can't find that softkey on the secondary line.
What could be the cause?
Thanks, regards,
04-17-2017 07:37 AM
Hi there,
If you seize one of the secondary lines and then press the "More" Softkey is CFWDALL displayed?
Cheers!
Rob
04-17-2017 08:35 AM
Hi,
Thanks for your suggestion, but it is not displayed.
It is displayed "Pickup", "Newcall" at the 1st page, "Redial", "Gpickup" at the more 2nd page.
The "CfwdAll" softkey should be displayed at the 3rd softkey button at the 1st page, but it is not displayed any.
What could be the cause?
Regards,
04-17-2017 08:54 AM
Hi there,
I believe it would show on page 2 if it were working
softkeys seized Endcall Redial Pickup Gpickup Cfwdall
It could be this "Open" bug for CME;
03-09-2018 10:00 AM
he only way I know you can do this is to do a call-forward all on the pilot number DN.
eg. If the Main operator number is 500.. you will configure
ephone-dn 10
number 5000
call-forward-all XXXX (where xxxx is your cfwd destination)
The challenge with this is that it can only be done by the administrator. You cant do this cfwd on the phone because the pilot number is not an extension assigned to any phone.
The other way around this is to use shared lines instead of hunt groups. This way the operator can se the cfwd all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide