09-30-2015 01:07 PM - edited 03-17-2019 04:26 AM
Hi All,
Does anyone know if Apache is the web server that runs on Call Manager 8.6 and if so what version of Apache is running?
Also if someone knows where can one get a link to this "documentation"?
Thanks,
Tom
Solved! Go to Solution.
09-30-2015 04:44 PM
The below document shows the open source used in CUCM 8.6 (2)
Ref: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucm/os_license/CUCM_862asu2.pdf
According to this doc the tomcat version is
You can also verify it from the CLI of the CUCM by running the command "show tech version" and search for tomcat, below is the output from a 8.5:
tomcat 6.0.20(1) <<
-Terry
Please rate all helpful posts
09-30-2015 04:44 PM
The below document shows the open source used in CUCM 8.6 (2)
Ref: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucm/os_license/CUCM_862asu2.pdf
According to this doc the tomcat version is
You can also verify it from the CLI of the CUCM by running the command "show tech version" and search for tomcat, below is the output from a 8.5:
tomcat 6.0.20(1) <<
-Terry
Please rate all helpful posts
09-30-2015 08:50 PM
Adding one more option to the good stuff by Terry [+5], you can use the following command as well ( output from a 10.x server ) :
admin:show packages active tomcat
Active Side Package(s): for tomcat package(s)
platform-tomcat-1.0.0.0-1.i386
cm-tomcatstats-0.0.0.1-0.i386
tomcat-7.0.53-0.i386
cm-cmtomcat-1.1.0.0-1.i386
HTH
Manish
09-30-2015 10:45 PM
+5 Manish for sharing additional information
-Terry
10-01-2015 11:23 AM
You guys rock. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide