03-11-2010 11:37 PM - edited 03-15-2019 09:44 PM
Hi everyone,
We use a CUCM 7.1.3 with CUBAC as call dispatcher. The calls will be accept and routed with an CTI route point.
If the operator wants to transfer the call (cosultand or blind), always the DN of the CTI Route point will be shown
on the called number.
But we want to see the origin calling id (for example the external number) !
Can anyone tell me, how can I fix this problem ?
thx a lot
Patrick
Solved! Go to Solution.
03-12-2010 07:33 AM
Hi Patrick,
On the CTI-RP DN config page (at the bottom of the page) check;
Forwarded Call Information Display | |||
---|---|---|---|
Caller Name | Caller Number |
Cheers!
Rob
03-12-2010 07:33 AM
Hi Patrick,
On the CTI-RP DN config page (at the bottom of the page) check;
Forwarded Call Information Display | |||
---|---|---|---|
Caller Name | Caller Number |
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide