10-11-2011 10:44 PM - edited 03-16-2019 07:27 AM
Dear All,
Is it possible to configure callmanger 4 as subscriber and callmanager 6 as publisher in the cluster? If it is then how we can do this?
regards,
RAHIL
Solved! Go to Solution.
10-12-2011 01:21 AM
Rahil,
NO - definitely NOT
All servers in the cluster must be on the EXACT same versions
You can howver connect between different versions of clusters by using INTER-CLUSTER TRUNKS.
Regards
Alex
10-12-2011 01:21 AM
Rahil,
NO - definitely NOT
All servers in the cluster must be on the EXACT same versions
You can howver connect between different versions of clusters by using INTER-CLUSTER TRUNKS.
Regards
Alex
10-13-2011 01:10 AM
Thnx campbell. I was in confusion at that moment and was trying to integrate both cucm6 and 4 in cluster but logs were showing that cucm 4 which was to be made as subscriber was able to resolve the ip but wasn't able to \\cucm6\c$.
regards,
RAHIL
10-13-2011 01:11 AM
one thing more, can we have more than one publisher in the cluster of ifferent versions
10-13-2011 01:24 AM
Hi
One CLuster can only have one Pub.
Tapan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide